Philips DVP900SA/00_A user manual Optional Connecting to an, Audio System Receiver

E n g l i s

Connections

h

OPTICAL

AUDIO

IN

DIGITAL

Stereo has Dolby Pro Logic or Right

/Left Audio In jacks

1 Select one of the video connections to your TV (CVBS VIDEO IN, S-VIDEO IN, or COMPONENT VIDEO IN) depending on the options available on your TV.

2Set the PROGRESSIVE/INTERLACE switch to INTERLACE for CVBS or S- VIDEO connections.

3Set the PROGRESSIVE/INTERLACE switch to PROGRESSIVE for COMPONENT VIDEO IN connection with a Progressive Scan TV.

4Use the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the stereo system (cable not supplied).

Helpful Hint:

–For optimum stereo sound quality, always connect Left and Right channel from the multi-channel output and set [Analog Output] setting to ‘STEREO’, see page 32).

14

Receiver has a PCM, Dolby Digital, or MPEG2 decoder

1Select one of the video connections to your TV (CVBS VIDEO IN, S-VIDEO IN, or COMPONENT VIDEO IN) depending on the options available on your TV.

2Connect either the COAXIAL or OPTICAL jack of the DVD Player to the corresponding Digital Audio In jack on your Receiver (cable not supplied).

3Set the DVD Player’s Digital Output to PCM-ONLY or ALL depending on the capabilities of your Receiver (see page 34 {DIGITAL OUTPUT}).

Helpful Hints:

–If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.