Philips DVP900SA/00_A user manual Connections, Using Scart jack, Using Composite Video jack Cvbs

Connections

Connecting TV

S-VIDEO
IN
AUDIO	SCART/RGB IN
IN
	Back of TV
VIDEO IN	IN	COMPONENT
	S-VIDEO	VIDEO IN
	IN	Pr/Cr	AUDIO
			IN
		Pb/Cb
	VIDEO IN
		Y

			1						1		3
						2
SCAN MODE						SCAN MODE
Pr	Pb	Y			CENTE	Pr	Pb	Y			CENTER
			PCM / DIGITAL/						PCM / DIGITAL/
INTERLACE	COMPONENT		DTS / MPEG	L	L	INTERLACE	COMPONENT		DTS / MPEG	L	L
PROGRESSIVE						PROGRESSIVE

R R R R

VIDEO	S-VIDEO		COAXIAL OPTICAL MIXED 2CH	MAIN SUBWOO	VIDEO	S-VIDEO		COAXIAL OPTICAL MIXED 2CH	MAIN SUBWOOFER SURRO
		AV		6CHDISCR			AV		6CHDISCRETE
VIDEO OUT			DIGITAL OUT	AUDIO OUT	VIDEO OUT			DIGITAL OUT	AUDIO OUT

English

IMPORTANT!

–You only need to make one video connection from the following options, depending on the capabilities of your TV system.

–Connect the DVD system directly to the TV.

–RGB connection will let you use the features of both the Audio and Video in the DVD Player.

Using SCART jack

●Use the SCART cable (black) to connect the DVD Player’s SCART jack (AV) to the corresponding Scart input jacks on the TV (cable supplied).

Helpful Hint:

–Ensure that the “TV” indication on SCART cable is connected to the TV set and “DVD” indication on SCART cable is connected to the DVD Player.

IMPORTANT!

–You only need to make one video connection from the following options, depending on the capabilities of your TV.

–Connect the DVD Player directly to the TV.

Using Composite Video jack (CVBS)

1Use the supplied composite video cable (yellow) to connect the DVD Player’s yellow VIDEO OUT (CVBS) jack to the VIDEO IN jack (labeled as Video In, Composite, CVBS, or Baseband) on the TV (cable not supplied).

2Set the SCAN MODE switch to

INTERLACE.

3To hear the sound of this DVD Player through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/ R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV (cable not supplied).

9

/00_3139 246 13872

01-41 DVP900_00A1915/09/2004, 10:00 AM