Tape Operation/Recording
IMPORTANT!
–Before playing a tape, check and tighten slack tape with a pencil. Slack tape may get jammed or may burst in the mechanism.
–Store tapes at room temperature and do not put them too close to a magnetic field (for example, a transformer, TV set or speaker).
Tape playback
Rewinding or forwarding fast when playback is stopped
1Press 1 or ¡ on the front panel.
2Press 7 when you reach the desired passage.
Resetting tape counter number
●In stop mode, press 7.
General information on recording
English
●Only cassette keys can be used for tape playback control!
1Press OPEN 3 to open the tape deck door.
2Insert a recorded tape and close the tape door. ● Load the tape with the open side down and the
full spool to the left.
3Press TAPE on the remote control to select tape mode.
4Press 3 to start playback.
Interrupting playback
●Press 8 to interrupt playback.
Stopping playback
●Press 7 to stop playback.
●If you don’t intend to record via the microphone, unplug it to avoid unwanted recording source.
●For recording, only use tape of IEC type I(normal tape).
●The recording level is set automatically, regardless of the position of the Volume,Vocal, Key control and so forth.
●The type is secured at both ends with leader tape.
●To prevent accidental recording, break out the tab on the left shoulder of the tape side you want to protect.
●Press REC in Disc,Tuner or AUX mode.The record key ● cannot be pressed if there is no recordable tape in the tape deck.
35