En
DVD Setup Menu Options
Setting the TV Display |
| Switching the YUV/RGB |
glish
Set the aspect ratio of the DVD Player according to the TV you have connected. The format you select must be available on the disc. If it is not, the setting for TV display will not affect the picture during playback.
1In ‘VIDEO SETUP PAGE’, press 34 to highlight {TV DISPLAY}, then press 2.
2Press 34 to highlight one of the options below:
4:3 PAN SCAN – Select this if you have a normal TV and want both sides of the
picture to be trimmed or formatted to fit your TV screen.
4:3 LETTER BOX – Select this if you have a normal TV. In this case, a wide picture with black
bands on the upper and lower portions of the TV screen will be displayed.
16:9 – Select this if you have a wide- screen TV.
5Select an item and press OK.
This setting allows you to toggle the output of the video signal between RGB (on scart) and Y Pb Pr (YUV).
1In ‘VIDEO SETUP PAGE’, press 34 to highlight {COMPONENT}, then press 2.
YUV
Select this for Y Pb Pr connection.
RGB
Select this for Scart connection.
2Press 34 to select a setting, then press OK to confirm your selection.
Warning:
When the player is set toY Pb Pr (YUV), some TV may not properly synchronise with player on the SCART connector.
Progressive - turning on/off
This feature is only applicable if you have connected this DVD Player to a Progressive Scan TV through the Y Pb Pr jacks (see page 10).
1In ‘VIDEO SETUP PAGE’, press 34 to highlight {PROGRESSIVE}, then press 2.
OFF
To disable Progressive Scan function.
ON
To enable Progressive Scan function.
2Press 34 to select a setting, then press OK to confirm your selection.
Helpful Hint:
–To deactivate the progressive function manually, see page
TIPS: To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
32