Philips DVD615AT99 owner manual Spdif Out, Lpcm 96K

38 SPDIF Out, LPCM 96K

SPDIF Out

SPDIF is the Sony Philips Digital Interface, or a method of transferring digi- tal audio. If you connected the DVD Player to a Stereo using the COAXI- AL jack as shown on page 14, adjust the SPDIF OUT setting as described below. If you are not using the COAXIAL jack, no adjustment is necessary.

1 Press SYSTEM MENU.

	Press 9 repeatedly to select SPDIF SETUP, then press
2 OK.
3	SPDIF OUT will be selected. Press -.
	- - SPDIF SETUP - -
	SPDIF OUT	F	RAW
	LPCM 96K		PCM

MAIN PAGE

4 Press 8 or 9 to select RAW or PCM, then press OK. Choose RAW to select the original default audio settings as received by most Stereos. However, if the sound is distorted, your Stereo may need to receive audio in the PCM (pulse code modulation) format. Choose PCM if your Stereo is PCM-compatible. Refer to your Stereo owner’s manual for details.

5 Press SYSTEM MENU to remove the menus.

LPCM 96K

If you connected the Player to a Stereo using the COAXIAL jack as shown on page 14, you may need to adjust the LPCM 96K setting.

Discs are recorded in a certain sampling rate. (The higher the sampling rate, the better the sound quality.) Some Discs are recorded in a high sampling rate of 96 kHz. Set LPCM 96K to ON if you want the Player to detect the sampling rate of Discs during playback and automatically choose the best sound available.

1 Press SYSTEM MENU.

	Press 9 repeatedly to select SPDIF SETUP, then press
2 OK.
3	Press 9 to select LPCM 96K, then press -.
	- - SPDIF SETUP - -
	SPDIF OUT
	LPCM 96K	F	OFF
			ON
	MAIN PAGE

1,5

2-4

1,5

2-4

4 Press 8 or 9 to select OFF or ON, then press OK.

5 Press SYSTEM MENU to remove the menus.