Adjust settings, General setup, Audio setup

6 Adjust settings

1Press SYSTEM MENU.

2Select a setup page.

3Select an option and then press .

4Select a setting and then press OK.

•To return to the previous menu, press .

•To exit the menu, press SYSTEM MENU.

•[On] – Enable the screen saver.

•[Off] – Disable the screen saver.

[DIVX (R)VOD]

Display the DivX® registration code.

Tip

•Enter this DivX registration code when you rent or purchase video from http://vod.divx.com/.The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be played only on the device to which it is registered.

English

General setup

On [General Setup Page], you can set the following options:

[TV Display]

TheTV format determines the aspect ratio of display according to the type of TV you have connected.

4:3 Pan Scan (PS)

4:3 Letter Box (LB)

16:9 (Wide Screen)

•[4:3 Pan Scan] – For 4:3 screen TV: full-height display with the trimmed sides.

•[4:3 Letter Box] – For 4:3 screen TV: wide-screen display with black bars on the top and bottom of the screen.

•[16:9] – For wide-screen TV: display ratio 16:9.

[OSD Language]

Select the preferred language for on-screen display.

[Screen Saver]

The screen saver protects theTV screen damage due to prolonged exposure to a static image.

Audio setup

On [Audio Setup Page], you can set the following options:

[Analog Audio Setup] > [Analog Audio Setup Page] > [Downmix]

Select audio signals output to speakers.

•[L/R] – If the connected device supports the Dolby Pro Logic decoder, select this option.

•[Stereo] –If the sound is delivered from the two front speakers only, select this option.

•[3D Surround] – To apply the virutal surround sound effect, select this option.

[Analog Audio Setup] > [Digital Output] Select audio formats supported by the connected device.

•[SPDIF Off] – Turn off the digital output.

•[All] – If the connected device supports multi-channel audio formats, select this option.

•[PCM Only] – If the connected device cannot decode multichannel

audio, select this option.

[3D] >[3D Processing Page] > [Reverb Mode] Select a virtual surround sound mode.

EN 21