Philips DVD170AT manual Excellent A/V Connection, Digital Audio Stereo Sound Connection

STANDARD CONNECTIONS

EXCELLENT A/V CONNECTION

VIDEO AUDIO
IN	IN
	TV
VIDEO CABLE
AUDIO CABLE

Connection to a TV with a video (CVBS) jack.

1Connect the Video jack on the rear of the player to the cor- responding jack on the TV using the cable supplied.

2Connect the audio Left and Right channel jacks on the rear of the player to the corresponding jacks on the TV using the cable supplied. Alternatively, you can use the same cable to connect the audio Left and Right jacks on the rear of the player to the corresponding jacks on your stereo system.

CAUTION

Do not connect the player’s audio output to the phono input of your stereo system.

MULTICHANNEL SOUND FOR HOME THEATRE

DIGITAL AUDIO

IN

RECEIVER

DIGITAL AUDIO

CABLE

For multichannel sound, your player provides both digital and analogue audio outputs.

DIGITAL (MPEG 2 MULTICHANNEL OR DOLBY DIGITAL ) MULTICHANNEL SOUND

1For this, the highest multichannel sound quality, you need a digital multichannel A/V receiver.

2Connect the digital audio output on the rear of the player to a suitable input on the receiver using a digital audio cable. In this case, do not use the player’s audio Left and Right outputs.

3You will need to activate the digital output of the player (See Settings p. 22).

4The audio format of the digital output is dependent on the audio format of the selected audio channel. Make sure that the selected audio channel matches the capabilities of the receiver connected to the digital output.

ANALOGUE (DOLBY PRO LOGIC ) MULTICHANNEL SOUND

1If your TV set has a Dolby Pro Logic decoder, simply hook up the player to the TV using the A/V Euroconnector, S- Video and audio or Video (CVBS) and audio connections p. 11.

2If not, make the A/V Euroconnector, S-Video or Video (CVBS) connection to the TV p. 11, and connect the player’s audio Left and Right outputs to suitable inputs on a Dolby Pro Logic Audio/Video receiver, using the cable supplied.

3For speaker connections, follow the instructions given in the TV set or A/V receiver user manual.

NOTE

-You cannot use the RF modulator option for Home Theater.

-If the audio format of the digital output does not match the capabilities of your receiver, the sound will be muted.

DIGITAL AUDIO (STEREO) SOUND

CONNECTION

For this connection, giving the best possible stereo sound quality, you need an audio amplifier with digital input, and the digital output of the player must be activated.

Connect the player’s digital audio output to the corresponding input on the amplifier. In this case, do not use the player’s audio Left and Right outputs.

Caution:

Before connecting the players digital audio output to your audio system, make sure that the disc doesn’t contain digital control data for non-audio devices (i.e. controller).

12english