Philips DVD170AT NTSC/PAL Setting Infrared Remote Control, Headphones, Loading the Batteries

Page 7

STANDARD CONNECTIONS

NTSC/PAL SETTING

INFRARED REMOTE CONTROL

Use the NTSC/PAL switch on the rear of the player to set the player menu according to the standard used by your TV set. To activate the new setting, the player needs to be switched off and on again.

NOTE

-The video output standard for video CD and DVD-Video discs must correspond to the disc being played.

LOADING THE BATTERIES

1Open the battery compartment cover.

2Insert two ‘AAA’ (R03) batteries as indicated inside the bat- tery compartment.

3Close the cover.

HEADPHONES

To listen to the player sound directly through headphones, plug the headphone into the headphone jack on the front of the player. Adjust the volume as desired with the headphone volume control.

CONNECTING THE POWER SUPPLY

1Plug the feed end of the power cord supplied into the Power connector on the rear of the player.

2Plug the supply end of the cord into an AC outlet.

NOTE

-The player automatically adjusts to the local AC voltage.

-When the player is in the “OFF” position, it still consumes some power. If you wish to disconnect your player comple- tely from the power supply, pull the plug from the AC Outlet.

CAUTION

Only qualified service personnel should remove the cover or attempt to service this appliance.

CAUTION

Do not mix old and new batteries, and NEVER mix dif- ferent types of batteries (standard, alkaline, recharge- ables, etc.).

english 13

Image 7

Contents English Introduction ContentsIntroduction Introduction PlacementUnpacking Rear of Player InstallationPower supply Digital audio output Front of PlayerNext chapter or track/ search forward Play Remote ControlDisplay Numeric key padConnection to a TV with an S-Video jack Standard ConnectionsGeneral Note Highest Quality A/V Connection USA Highest Quality A/V Connection EuropeAnalogue Dolby PRO Logic Multichannel Sound Excellent A/V ConnectionDigital Audio Stereo Sound Connection Connection to a TV with a video Cvbs jackLoading the Batteries NTSC/PAL Setting Infrared Remote ControlHeadphones Connecting the Power SupplyInserting a Disc Switching onGetting Started OperationMoving to Another Chapter Playing a DVD-VIDEO DiscPlaying a DVD-VIDEO Disc Playing a TitleSearch Moving to Another TitleParental Control Still Picture and Step FrameRepeat Changing the Audio Language and Channel ConfigurationChecking the Contents of DVD-VIDEO Discs Menus Repeat CHAPTER/TITLE/DISCMoving to Another Track Playing a Video CDPlaying a Video CD Playing a DiscTo return to normal play, press Shuffle briefly again Playback Control PBCTo get a still picture, press during play Track calendarPlaying AN Audio CD Playing a Video CD Playing AN Audio CDPause To clear your whole selection and start again, press FTS Favorite Track SelectionSettings Playing AN Audio CD SettingsTo exit from the Settings menu, press Return or Setup Auto Play Authorizing Discs Parental ControlParental Control Activating Parental ControlBefore Requesting Service Before Requesting ServiceCleaning Discs Instructions Diagnostic Program