Preparation
Switching On
1Switch on the TV and DVD player.
2Set the TV to the correct Video IN channel. (eg. EXT1, EXT2, AV1, AV2, AUDIO/VIDEO, etc. Please refer to to your TV owner’s manual for detail)
➜ The player display lights and the default screen appears on the TV.
3If you are using an external equipment (eg. audio system or receiver), turn them on and select the appropriate input source that was used to connect to the DVD player output. Refer to the equipment owner’s manual for detail.
Operation
Basic Playback
1Press POWER ON/OFF on the front panel.
2Press OPEN/CLOSE on the front panel to open disc loading tray.
3Place the chosen disc in the tray, with the label facing up.
4Press OPEN/CLOSE again to close the tray.
➜ After recognizing this disc the player begin to playback automatically.
Notes:
–DVDs may have a region code.Your player will not play discs that have a region code different from the region code of your player.
–If ‘Disc Lock’ is set to ON and the disc inserted is not authorized, the
General operation
Video control during playback
STOP DVD VCD CD
1 You can resume the play from the point at which you stopped last time, if you just press the STOP key once. It will start from the beginning if you press the STOP key twice to stop playback.
PAUSE/STEP DVD VCD CD
1 To get a still picture, press PAUSE key during playback.
2 To step forward to the next frame picture, press PAUSE key again.
3 To resume normal playback, press PLAY.
SEARCH DVD VCD CD
1 To search the contents in fast speed, press the 2 or 1 for fast forward/backward searching.
2 Press the 1 or 2 again to increase the speed for searching.
3 Press PLAY to return to the normal playback.
10
DVD616K IFU for /751 | 3141 016 18911 |