Philips DVD616K manual Preparation, Basic Connections, Connecting to a TV

Preparation

Basic Connections

●Please refer to the instruction books of your TV, VCR, Stereo System or other devices as necessary to make the best connections.

Connecting to a TV

If your TV has a CVBS Video input connector,

0Connect the CVBS VIDEO OUT on the DVD player to the CVBS VIDEO IN (cable supplied).

If your TV has a S-Video input connector,

0Connect the S-Video OUT on the DVD player to the S-Video IN (not supplied).

If your TV has a Component video (Y/CB/CR)input connector,

0Connect the Y/CB/CR VIDEO OUT on the DVD player to the corresponding connector on the TV using the component video cable (not supplied).

●Make one of the following connections, depending on the capabilities of your existing equipment.

The following guidelines are options for the best picture and sound quality available on your DVD player.

Caution: Do not connect the component video and S-Video output at the same time as only one can be active at any time( refer to chapter “Video Out Setup”).

Warning!

–Never make or change connections with the power switched on.

–Connect the DVD player directly to your TV, instead of eg. a VCR, to avoid distortion because DVD video discs are copy protected.

–Do not connect the DVD player AUDIO OUT to PHONO IN of your player.

7

DVD616K IFU for /751 3141 016 18911