1
2
3
4
5
Setting the clock
In standby mode, press and hold DISPLAY/CLOCK.The clock digits flash on the display panel.
Press TUNING à / á (or à / á on the remote control) to set the hours.
Press í/ ë to set the minutes.
Press PROG to select between 12 hour and 24 hour display.
Press DISPLAY/CLOCK agian to store the setting.
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support progressive signals or the video cables are not connected accordingly, see the user manual for proper progressive scan setup or deactivate the progressive scan feature as below:
1)Turn off your TV progressive scan mode then turn on to interlaced mode.
2)Select “OFF” in PROGRESSIVE menu of the system setup menu to turn off progressive scan, then press SYSTEM MENU on the remote to exit the system menu.
– – Audio Setup Page – –
NIGHT MODE
DIGITAL Output
Dolby Digital Setup
– – Preference Page – –
Audio
Subtile
Disc Menu
Parental
Password
Divx Subtitle
Default
Tip
See chapters "Preparations" and "System Menu Options" in the User Manual for detailed descriptions.