Install
■Using the ACI function
This TV has an ACI function which decodes the ACI (auto- matic Channel Installation) data.
Using the ACI function allows all TV channels transmitted from the cable TV station to be properly registered quickly ac- cording to the data from the cable TV station.
Caution:
If your cable TV station broadcasts ACI data and if “ACI START/ACI SKIP” appears in the Auto Program menu, the ACI function is enabled. In all other cases, it is disabled.
1Press 
/
to choose ACI START. Then press OK to start the ACI function.
When you don't want to use the ACI function:
Press 
/
to choose ACI SKIP and then press OK .
If the Auto Program menu changes to another menu: Depending on your cable TV station, there may be a broadcast selection menu set up by the cable TV sta- tion.
Follow the menu indications and use the 
/ 
and 
/
buttons to operate the menu. After you have
made the setting, press OK .
If “ACI ERROR” is displayed in the Auto Program menu:
“ACI ERROR” denotes that the ACI function is not work- ing properly. Press OK to start the ACI function again. If “ACI ERROR” still appears even after you have tried to start the ACI function several times, press 
to start the Auto Program function. It does not cause any prob- lem because all the TV channels are registered to the PR channels by the Auto Program function.
2When the settings are completed, the Edit menu is displayed. Return to the instructions that you were reading before, and continue the operation.
When the “Initial setting” has been made: Return to step 7 of “Initial setting” on page 4.
When the “Auto Program” has been made: Return to step 4 of “Auto Program” on page 23.
Notes:
•If you have any questions about the items in the Broadcast Selection menu or how to operate the menu, please contact your cable TV station.
•When the cable TV broadcast reception is poor, the ACI function will not work properly.
•If there is an error in the ACI data itself, the TV channel can not be registered properly. If this hap- pens, turn the ACI function off (ACI SKIP) and use the Auto Program function. Alternatively, use the Edit/Manual function to correct the PR channel setting.
■Downloading the PR channel data to
the VCR.
You can transmit the latest PR channel data from the TV to the VCR with
1Make sure that the T-V LINK menu is dis- played.
Notes:
•You cannot display the
•You cannot transmit the PR channel data to the VCR when a
nected. Press TV to exit the menu.
• For details about
2Turn the VCR on.
3Press OK .
The data transmission begins.
The display disappears once the data transmission ends.
Note:
•Depending on the type of VCR, the display may change once data transmission ends.
In this case, refer to the VCR’s manual.
■Changing the Country Setting
1Display the Install menu.
•To return to the Install menu from the Edit menu,
press 
(information).
2Press 
/
to choose AUTO PROGRAM. Then press OK .
The Country menu appears.
3Press 
/ 
/ 
/
to choose a Country. This completes the setting.
4 Press OK to exit the MENU.
•To return to the Install menu, press 
(informa- tion).
26
