Connections
English
Step 5: Connecting the power
adaptor
IMPORTANT!
–Never make or change any connection with the power switched on.
After everything is connected properly, connect the AC power adaptor to the system and then to the power outlet.
Optional: Connecting additional equipment
IMPORTANT!
–Some discs are
cannot record the disc through a VCR or digital recording device.
–When making connections, make sure the colour of cables matches the colour of jacks.
–Always refer to the owner's manual of the other equipment for complete connection and usage details.
AUDIO OUT
L
R 
| AUDIO IN |
VIDEO IN | L |
L | R |
|
B
Using the VCR for recording DVDs B
Connect one of the system's VIDEO OUT jacks to the corresponding VIDEO IN jack and LINE OUT (R/L) jacks to the AUDIO IN jacks on the VCR.This will allow you to make analogue stereo (two channel, right and left) recordings.
A
Listening to the playback of other equipment A
Use a cinch cable (not supplied) to connect AUX on the rear panel of the DVD player to the analogue audio out terminals of an external equipment (TV,VCR, Laser Disc player, DVD player or CD Recorder).
Before starting operation, press SOURCE on the front panel to select AUX or press AUX on the remote in order to activate the input source.
Note:
–If you are connecting equipment with a mono output (a single audio out terminal), connect it to the AUX left terminal. Alternatively, you can use a “single to double” cinch cable (the output sound still remain mono).
14