Philips HTS3500K Connections to External Devices, Connecting a VCR or Cable/Satellite Box

E n g l i s h

Connections to External Devices

Connecting a VCR or

Cable/Satellite Box

VCR or Cable/

Satellite Box

DVD System

Viewing and listening to the playback

1Connect the VCR or Cable/Satellite Box to the TV as shown.

2Connect the DVD system’s AUX IN (R/L) sockets to the AUDIO OUT sockets on the VCR or cable/satellite box.

Press AUX/DI on the remote to select “AUX” in order to activate the input source.

12

Using the VCR for recording DVD playback

Some DVDs are copy-protected. You cannot record or dub protected discs using a VCR.

3Connect the DVD system’s S-VIDEOsocket to the S-VIDEO IN socket on the VCR.

4Connect the DVD system’s LINE OUT (R/L) sockets to the AUDIO IN sockets on the VCR.

This will allow you to make analogue stereo (two channel, right and left) recordings.

Before recording, set the volume level of the DVD system to level 1 and below, in order to enable sound output from the LINE OUT sockets.

To view DVD playback while recording, you must connect the DVD system to your TV using a CVBS (as shown above) connection.

001-049 hts3500-51-Eng 12 9/14/05, 2:50 PM