Setting the clock
1
In standby or any source mode, press and hold CLOCK on the remote control.
The clock digits will be lighted on the display.
2
Press ¡ / ™ on the set repeatedly to set the hours.
I
3
Press à / á on the set repeatedly to set the minutes.
4
Press CLOCK again to store the setting.
+
VOL
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support progressive signals or the video cables are not connected accordingly, see the user manual for proper progressive scan setup or deactivate the progressive scan feature as below:
1)Turn off your TV progressive scan mode then turn on to interlaced mode.
2)Select “OFF” in PROGRESSIVE menu of the system setup menu to turn off progressive scan, then press SYSTEM MENU on the remote to exit the system menu.
Or To turn off progressive scan, you may also first press OPEN/CLOSE open the disc door, then press 1 on the remote control, and press AUDIO on the remote.
PHILIPS
PHILIPS
PHILIPS
UDIOMUTE
+
Tip
See chapters "Getting Started" and "DVD menu operations" in the
User Manual for detailed descriptions.