Important!
–This set can only be operated after the supplied DIN cable has been connected.
Tips
–For connecting to a Progressive Scan TV, refer to the user manual for proper connections and detailed setup.
1
Connect the speaker wires of the right speaker and subwoofer to the
left speaker.
2
Connect the supplied FM wire antenna.
3
Connect the left speaker and the DVD player by using the supplied
DIN cable.
4
Connect the DVD player to your TV using the supplied composite video cable.
5
Connect the VCR or cable/satellite box to the TV system. Connect AUX
IN 1 jacks to the AUDIO OUT jacks on theVCR or cable/satellite box.
6
Connect the AC power cord to the wall socket.
|
|
|
|
| ATo listen to TV channels through this system, use the |
|
|
|
|
| audio cable (white/red, not supplied) to connect |
|
|
|
|
| |
|
|
|
|
| AUX IN 1 (L/R) jacks to the corresponding AUDIO |
|
|
|
|
| OUT jacks on the TV set. |
|
|
|
|
| |
|
|
|
|
| BTo listen to TV channels through this system, use the |
|
|
|
|
| audio cable (white/red, not supplied) to connect |
|
|
|
|
| AUX IN 1 (L/R) jacks to the HEADPHONE jack on |
|
|
|
|
| the TV set. |
8 |
|
|
|
| ● Before starting operation, press AUX1/2/TV on |
|
|
|
|
| the remote control to select “AUX 1” to activate |
|
|
|
|
| the input source. |
|
|
|
|
| ● See the User Manual for other TV connection options. |
AC Power Cord
IN OUT
Setting up the TV
1
Press SOURCE on the set (or DISC on the remote) to select disc source.
2
Turn on the TV and set it to the correct Video In channel.