SETUP & INSTALLATION
This turntable has been designed exclusively for DJ use and can be setup in a variety of different ways depending on your mixing style. The turntable should rest on a level and stable surface that is clear of obstructions. If a mixer is placed between two turntables make sure that there is at least ¼" (7mm) between the mixer and the turntables to prevent damage to the turntables and to reduce unwanted system noise.
Mixer
Mixer
¼"¼"
Mixer
¼"¼"
Mixer
85 mm
Setup Style 1 (traditional)
Best For:
Long mixes and blending techniques
Setup Style 2 (battle style, scratching)
Best For:
Scratching, cutting, and aggressive mixing techniques
There are many variations of these setups. Find the best setup that works for your mixing style by experimenting with different turntable and mixer placements. It is strongly recommended that the top mixer surface and the top flat surface of the turntable be at the same level.
SETUP & INSTALLATION | PAGE 2 |
