Philips HTS3320/51 user manual Night Mode, CD Upsampling

DVD Setup Menu Options (continued)

Audio Setup Page (underlined options are the factory default settings)

Speakers Volume Access the speaker’s level setup menu. Use W X keys to adjust the volume level for each connected speaker between -6dB to +6dB.

Speakers Delay Access the speaker’s distance setup menu. Use W X keys to set the delay times for the centre and rear speakers based on the listening position and distance.

Note: 1 ms increase/decrease of delay time is equivalent to 30 cm change in distance. Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers.

Night Mode	This mode optimises playback of sound at low volume. High
	volume outputs will be softened and low volume outputs will be
	enhanced to an audible level. This feature is only applicable for
	DVD video discs with Dolby Digital mode.
	{ On }	–	Turns on night mode.
	{ Off }	–	Turns off night mode feature. Selects this to
			enjoy the surround sound with its full
			dynamic range.
	This feature enables you to convert your music CD to a higher
CD Upsampling
	sampling rate using sophisticated digital signal processing for
	better sound quality. If you have activated the CD upsampling
	feature, the system will automatically switch to stereo mode.
	{ Off }	–	Turns off CD-upsampling.
	{ 88.2 kHz (X2) } – Select this to convert the sampling rate of
			the CDs twice as high as the original rate.

Note: If you press the SURR button on the remote control to select multi-channel mode, it will turn off the CD upsampling feature.

English

35