|
| Making connections |
| 9 |
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
Connecting an antenna, cable TV, or satellite TV box
Important: The antenna connector should only be
To connect an antenna, cable TV, or satellite TV box:
1Turn off the TV before connecting the antenna.
2Connect one end of a coaxial cable (not included) to the RF OUT jack on the antenna or on the cable or satellite TV box. If you are using an antenna with
| ANT/CABLE IN jack (on | |
| the side of the TV) |
|
VHF, UHF, or | RF coaxial cable (75 ohm) |
|
combination |
|
|
antenna |
|
|
| RF coaxial cable (75 ohm) |
|
|
| |
|
| |
| (not provided) | Home antenna |
VHF antenna | UHF antenna | terminal (75 ohm) |
|
| |
| Combiner (not provided) |
|
|
| |
| RF coaxial cable (75 ohm) | |
| RF coaxial cable (75 ohm) |
|
3Connect the other end of the cable to the ANT/CABLE IN jack on the side of your TV.
Antenna, cable
TV, or satellite box
Side of TV
HEADPHONE
Notes:
Use a coaxial cable to eliminate interference and noise from radio waves.
Do not bundle the coaxial cable with the power cord or other cables.
If the antenna is not installed correctly, contact qualified service personnel to correct the problem.
Connecting a VCR
To connect a VCR:
1Make sure that your TV’s power cord is unplugged and the VCR is turned off.
2Connect an AV cable to the AV VIDEO and AUDIO out jacks on the VCR.
| Note: Cables are often |
| |
| Connect yellow to yellow, |
| red to red, and white to |
| white. Cables may be |
AV cable | separate or combined. |
|
| VGA | VGA |
| |
HDMI3 | HDMI2 | AUDIO IN |
| ||
|
| ||||
AUDIO OUT |
|
|
|
| |
L | R | AV2 |
|
|
|
|
|
|
| ||
| VIDEO | L | R |
|
|
| L |
|
|
|
|
| Y | PB | R | LL | RR |
| R |
| COMP2 |
|
|
| COMP1 |
|
|
|
|
Back of TV
3Connect the other end of the AV cable to the AV2 VIDEO and L and R audio jacks on the back of your TV.
