Philips HTS3019/12 user manual Select a play source, Scart, AUX Audio IN-AUX

2 Press to change the volume level, then press OK.

»The test tone is emitted from the speaker.

•Repeat the above setting for other speakers until all the speakers’ output level sounds equally balance.

•To exit the menu, press SETUP.

To set the output delay time (centre and rear speakers only)

1 Select [Speakers Delay] in the menu, then press .

Speakers Distance Setup

Center	0MS
Rear Left	0MS
Rear Right	0MS

2 Press to set the delay time, then press OK.

•Repeat the above setting for other speakers until the sound output from different speakers reach the listening position at the same time.

•To exit the menu, press SETUP.

Tip

•Set a longer delay time if the centre speaker or rear speaker is closer to the listening position than the front speaker.

•Allow 1ms setting for every 1 foot distance between the speaker and the listening position.

Select a play source

On the main unit	English
	Get started

•Press the SOURCE button repeatedly to select: DISC > USB > FM > AUX 1 > AUX 2 > SCART IN > DISC ...

On the remote control

•Press AUDIO SOURCE repeatedly to switch to the connected audio source.

Display	Device connected to
SCART IN	SCART TO TV socket
AUX 1	AUDIO IN-AUX 1
	sockets
AUX 2	AUDIO IN-AUX 2
	sockets

•Press RADIO to switch to FM band.

•Press USB to switch to USB mode.

•Press DISC to switch to disc mode.

EN 15