Philips MCD728/93 Setting sleep/wake-up timer, Sleep timer setting, To deactivate the sleep timer

Other Functions

English

Setting sleep/wake-up timer

Sleep timer setting

In power-on mode, the sleep setting enables the system to switch to standby mode automatically at a preset time.

1In power-on mode, press SLEEP/TIMER on the remote repeatedly to select a preset time.

➜The selections are as follows (time in minutes):

00 ➜ 10 ➜ 20 ➜ 30 ➜ 40 ➜ 50 ➜ 60 ➜ 70

➜80 ➜ 90 ➜ 00

2When you reach the desired length of time, stop pressing SLEEP/TIMER.

➜ appears.

To deactivate the sleep timer

●Press SLEEP/TIMER repeatedly until “00” is displayed, or press STANDBY-ONB (B on the remote).

In standby mode, the timer setting enables the system to switch on automatically at a set time.

Wake-up timer setting

IMPORTANT!

– Before setting the timer, ensure that the clock is set correctly.

1 Press and hold SLEEP/TIMER until the time flashes on the display.

➜ ”TIMER SET” scrolls.Then, the hour digits flash on the display screen.

2Turn VOLUME -/+clockwise or anticlockwise or press VOL -/+on the remote to set the hours.

3Press SLEEP/TIMER to confirm.

➜ The minute digits flash on the display screen.

4Turn VOLUME -/+clockwise or anticlockwise or press VOL -/+on the remote to set the minutes.

5Press SLEEP/TIMER to confirm the time setting.

➜ ”OFF” flashes on the display screen.

6Turn VOLUME -/+clockwise or anticlockwise or press VOL -/+on the remote to select “ON”.

➜ icon appears on the display screen.

To deactivate the timer

● Select “OFF” at Step 6.

36