Philips MCD728/93 manual Connecting speakers, Connecting the control cable, Connecting TV

Page 29

Connections

English

Step 2: Connecting speakers

1Connect the speaker wires to the SPEAKERS terminals, right speaker to FRONT (4Ω) R and left speaker to FRONT (4Ω) L. Fully insert the connectors on the cables into the terminals and fasten the hooks to ensure firm connection.

2Connect the passive subwoofer to the SUBWOOFER (8Ω) terminal with the supplied subwoofer cable by matching the plug types.

Notes:

–Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to short-circuit.

–For optimal sound performance, use the supplied speakers.

–Do not connect more than one speaker to any one pair of +/- speaker jacks.

–Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.

Step 3: Connecting the control cable

●Connect the serial port marked “CONTROL CABLE” at the rear of the DVD player to the same port at the rear of the power amplifier with the supplied flat control cable.

Step 4: Connecting TV

IMPORTANT!

–You only need to make one video

connection from the following options, depending on the capabilities of your TV.

–Connect the DVD system directly to the TV.

Using Composite Video jack

1Use the composite video cable (yellow) to connect the system's VIDEO jack to the video input jack (or labelled as A/V In,Video In, Composite or Baseband) on the TV set.

2To listen to the TV channels through this DVD system, use the audio cables (white/red-not supplied) to connect AUX IN L/R jacks to the corresponding AUDIO OUT jacks on the TV.

10

Image 29

Contents Register your product and get support at DVD Micro TheatreProhibited English IndexRegion Codes Disc OperationsPlayable Discs Playing discsWMA Using the Disc MenuBasic playback controls Slow Motion DVD/VCD Repeat A-B DVD/VCD/CD/MP3/DivXProgram not for Picture CD Forward/Reverse Searching DVD/VCD DivX/CD/MP3/WMAPlaying MP3/WMA disc Special disc featuresPlaying MP3/WMA/JPEG Picture Playing Jpeg Picture CD Special Jpeg featuresPreview function Jpeg Zoom picture JpegPlaying a DivX disc Basic operations System Menu OptionsTV Display OSD LanguageSpdif Setup Analog Audio SetupDivx Code Spdif OFFTurns off the Spdif outputNight Mode Dolby Digital Setup3D Processing HdcdHdmi Setup TV ModePicture Setting NC-17 ParentalRating explanations Password Setup DefaultPassword Mode PasswordRadio Reception Setting the clockOther Functions Sleep timer setting Setting sleep/wake-up timerTo deactivate the sleep timer Wake-up timer settingSpecifications Solution TroubleshootingProblem Troubleshooting Troubleshooting Glossary Language Code Contents Other Functions System Menu OptionsSupplied accessories FeaturesGeneral Information Environmental informationWhen a disc becomes dirty InstallationMaintenance Placing the speakers and subwoofer ConnectionsSpeaker Antenna Type plate is located at the bottom of the systemConnecting the control cable Connecting speakersConnecting TV Using Composite Video jackUsing S-Video jack Using Component Video jacks Y Pb PrEnglish Using an accessory RF modulator Connecting FM antennaVideo input jack on the RF modulator RF modulator to the Antenna in jack on the TVAdditional Connecting additional equipment Connecting the power cordUsing the VCR for recording DVDs B Connecting an active subwoofer DPlayback starts automatically Connecting to a TV with Hdmi Jack EFunctional Overview DVD player and power amplifierRemote control # Zoom ≤ SLEEP/TIMERLoudness ProgramSetting up the TV Inserting batteries into the Remote ControlUsing the Remote Control to operate Player Getting StartedTo deactivate Progressive manually Setting the OSD Language Setting language preferenceSetting the Audio, Subtitle and Disc Menu language Press System MenuVolume control Switching the system on/offSound control LoudnessBasic Operations Demonstration modeDimming the display screen To activate the demonstrationMeet Philips at the Internet