Setting the clock
1
In standby mode, press and hold CLOCK on the remote.
2
When the hour digits flash, turn VOLUME on the system or press VOL +/- on the remote to set the hours.
3
Press CLOCK again and the minute digits flash.Then turn VOLUME on the system or press VOL +/- on the remote to set the minutes.
4
Press CLOCK again to confirm the time setting.
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support progressive signals or the cables are not connected accordingly, see the user manual for proper progressive scan setup or deactivate the progressive scan feature as below:
1)Turn off your TV progressive scan mode or turn on to interlaced mode.
2)Press SYSTEM MENU on the remote to exit the system menu and then DISC and “1” to exit progressive scan.
SPDIF SETUP
3D PROCESSING
DIVX (R) VOD
AUDIO SYNC
QUALITY
HDMI SETUP
Tip
See chapters "Getting Started" and "System Menu Options" in the
User Manual for detailed descriptions.