4 Get started
Caution
•Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the back of the apparatus.Write the numbers here: Model No. __________________________
Serial No. ___________________________
Install remote control batteries
Caution
•Risk of explosion! Keep batteries away from heat, sunshine or fi re. Never discard batteries in fi re.
•Risk of decreased battery life! Never mix different brands or types of batteries.
•Risk of product damage! When the remote control is not used for long periods, remove the batteries.
1Open the battery compartment.
2Insert 2 AAA batteries with correct polarity
3Close the battery compartment.
Set clock
1 | In the standby mode, press CLOCK to | English | |||
| |||||
| activate the clock setting mode. |
| |||
| » The time digits are displayed and begin |
| |||
| to blink. |
| |||
| » If the time digits are not displayed, |
| |||
| press and hold for more than 2 |
| |||
| seconds to switch to standby mode, |
| |||
| then repeat step 1. |
| |||
2 | Press | / |
| to set the hour. |
|
|
| ||||
|
| ||||
3 | Press | / to set the minute. |
|
4Press and hold CLOCK to select
5Press CLOCK to confi rm.
Turn on
1 Press .
»The unit switches to the last selected source.
Switch to standby
1 Press and hold for more than 2 seconds to switch the unit to standby mode.
»The clock (if set) appears on the display panel.
To switch the unit to Eco Power Standby mode:
1 During play, press .
»The backlight on the display panel turns off.
Select the correct source on
TV
1Turn on the apparatus.
2Press DISC to select the disc source.
EN 17