Philips MCD802/98 user manual Listen to the radio

Page 28

8Listen to the radio

Tip

For better FM stereo reception, connect the supplied T-Type antenna.

For optimal reception, fully extend and adjust the position of the FM antenna.

Position the antenna as far away as possible from your TV, VCR or other radiation source to prevent interference.

First time tuning

When you access to radio mode for the fi rst time, follow the instructions to install the radio stations.

1Press TUNER.

»’AUTO INSTALL ... PRESS PLAY’ is displayed.

2Press .

»All detected radio stations are stored.

»Once complete, it tunes to the fi rst preset radio station.

To stop auto tuning, press .

Note

This unit can store up to a maximum of 40 radio stations.

If auto installation is not activated or less than 5 radio stations are stored, you will be prompted to check the FM antenna.

Tune to a radio station

1Press TUNER to select the tuner source.

2 Press and hold / for more than 2 seconds.

 

» The radio tunes to a station with

 

 

strong reception automatically.

English

3

Repeat step 2 to tune to more stations.

 

• To tune to a weak station, press/ repeatedly until you fi nd optimal

reception.

Reinstall radio stations

1Press TUNER.

2 Press and hold PROG for more than 2 seconds.

»All previously stored radio stations are replaced.

Program radio stations manually

You can program a maximum of 40 preset radio stations.

1Tune to a radio station. (See ‘Tune to a radio station’ on page 29)

2Press PROG to activate program mode.

3 Press / to allocate a number to this radio station, then press PROG to confi rm.

»The preset number and the frequency of the preset station are displayed.

4Repeat the above steps to program other stations.

Tip

To overwrite a programmed station, store another station in its place.

Select a preset radio station

1 In tuner mode, press / to select a preset number.

EN 29

Image 28
Contents DVD MicroTheater TH คู่มือผู้ใช้ =+7 KO #  Register your product and get support at MCD802/98Contents Safety Important Safety InstructionsHearing safety Listen at a moderate volumeRecycling English Introduction What’s in the boxYou can play DVD discs with the following region codes Asia Pacifi c, Taiwan, Korea Australia, New ZealandOverview of the main unit Overview of the remote control DisplayMute or restore volume Access or exit the karaoke menu Select a viewing angle of a DVDDisplay play information on a connected TV Change the audio channel of a karaoke discConnect Connect control cableConnect speakers Connect TV videoOption 2 Connect through S-Video socket Option 1 Connect through composite video socketConnect FM antenna Connect an external audio System optionalOption 5 Connect through Hdmi socket Connect power For better reception, connect the FM T-Type antennaInstall remote control batteries Get startedSet clock Turn onChange system menu language Select the correct TV systemTurn on Progressive Scan Play Play discPlay from USB Play DivX videoView pictures Play controlPlay options Select an audio language Press Audio repeatedly to select an audio languageAdjust sound Adjust settings General setupAudio setup Unlock Play all discsVideo setup Picture SettingsTV Type With both PAL and NtscPreferences Manual for detailsTip Default Version Info Display the software version of this apparatusListen to the radio Delete a preset radio station Change tuning gridSet the alarm timer Set the sleep timerActivate and deactivate the alarm timer KaraokeCreate MP3 fi les Play from an external deviceEnjoy karaoke Record to a digital recorder Listen through headphoneSpecifi cations Amplifi erDisc Tuner FMUSB playability information Supported disc formatsGeneral information Maintenance Troubleshooting 38 EN Glossary JpegPBC Video