Philips MDV411SL owner manual Connecting to a TV Only TV has an S-Video In Jack

12 Hookups (cont’d)

Connecting to a TV Only

TV has an S-Video In Jack

	Back of TV	2
	(example only)
1		RIGHT AUDIO IN
		LEFT AUDIO IN
		S-VIDEO IN

3

Connect an S-Video cable (not supplied) to the S-VIDEO
(VIDEO OUT) jack of the DVD Player and to the TV’s
1 S-VIDEO In jack.
Connect the supplied audio cable to the red and white
AUDIO OUT jacks on the DVD Player and to the left/right
2 AUDIO IN jacks on the TV. Match the cable colors to the jack
colors.
Plug the power cords of the DVD Player and the TV into an
active power outlet. Press STANDBY-ON y on the front of
3 the DVD Player to turn it on.
Turn on the TV. Set it to the correct S-Video In channel. See
your TV owner’s manual for details. Or, go to your lowest TV
4 channel (01 or 02) and change channels downward until you see the
blue DVD screen saver on the TV.
	Helpful Hints
	• On the TV, the S-Video In jack
	may be labeled Y/C, S-Video, or
	S-VHS (super video).
	• If your TV has a single Audio In
	jack instead of separate
	left/right Audio In jacks, you will
	need a different audio cable.
	You need a “splitter” audio
	cable to go from the AUDIO
	OUT jacks of the DVD Player to
	the single Audio In jack on your
	TV. See your electronics retailer
	for details.