Philips MDV411SL owner manual Set Digital Output

Hookups (cont’d) 15

Connecting to a TV and a Stereo

(Stereo has Dolby® Digital or MPEG2)

Stereo Receiver

(example only)

1

COAXIAL DIGITAL

AUDIO IN

3

Back of TV

(example only)

VIDEO IN

2

Connect the COAXIAL jack of the DVD Player to the
COAXIAL DIGITAL AUDIO IN jack on your Stereo. Use an
1 appropriate digital audio cable (not supplied). See your electronics
retailer for details and availability.
Connect the supplied video cable to the yellow VIDEO
(VIDEO OUT) jack of the DVD Player and to the TV’s
2 VIDEO IN jack. The supplied video cable has yellow markings.
Plug the power cords of the DVD Player, Stereo, and TV
into an active power outlet. Press STANDBY-ON y on the
3 front of the DVD Player to turn it on.
Turn on the Stereo and set it to the correct Audio In
4 details.channel or sound source. Refer to the Stereo owner’s manual for
Turn on the TV. Set it to the correct Video In channel. See
your TV owner’s manual for details. Or, go to your lowest TV
5 channel (01 or 02) and change channels downward until you see the
blue DVD screen saver on the TV.
		Helpful Hints
	•	Set DIGITAL OUTPUT and
		LPCM OUTPUT accordingly.
		Details are on page 40.
	•	Your Stereo must support
		MPEG2 or Dolby® Digital.
		Check the Stereo’s manual.
	•	If you prefer or need to use the
		S-VIDEO or Y Pb Pr jacks
		instead, see pages 12-13.