DVD Setup Menu Options (continued)
Accessing Audio Setup Page
1Press DISC and followed by SETUP on the remote.
2Use 1 2 keys to select ‘Audio Setup Page’.
3Press OK to confirm.
Audio Setup Page
Speakers Volume
Speakers Delay
Night Mode
CD Upsampling
CD Upsampling
This feature allows you to convert your music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality.
Make sure that the DVD system is in Stereo mode in order to access the CD upsampling option.
1In ‘Audio Setup Page’, use 34 keys to highlight { CD Upsampling }, then press 2.
{Off }
Select this to disable
{88.2 kHz (X2) }
Select this to convert the sampling rate of the CDs twice higher than the original.
E n g l i s h
Speakers Volume/Speakers Delay
These menus contain speaker setup options that allow you to adjust the individual speakers volume and distance. For details, see page 40.
Night Mode - turning on/off
When the night mode is activated, the high volume outputs are softened and low volume outputs are brought upward to an audible level. It is useful for watching action movies without disturbing others at night.
1In ‘Audio Setup Page’, use 34 keys to highlight { Night Mode }, then press 2.
{On }
Select this to level out the volume.
{Off }
Select this when you want to enjoy the surround sound with its full dynamic range.
2Use 34 keys to select a setting and press OK to confirm.
2Use 34 keys to select a setting and press OK to confirm.
Helpful Hint:
– If you press SURR button on the remote control to select
TIPS: The underlined option is the factory default setting.
To return to the previous menu, press 1. To remove the menu, press SETUP.
33
33 | 15/06/05, 1:20 PM |