Tuner Operations (continued)
Automatic presetting
Use automatic presetting to store or reinstall all the preset radio stations.
DVD system’s
display panel
1 
FM / MW
2 
START..
1Press TUNER on the remote to select “FM” or “MW”.
2Press and hold PROG until "START ..." appears.
➜ All the former presets will be overwritten.
Manual presetting
Use manual presetting to store only your favourite radio stations.
1Tune to your desired radio station (see “Tuning to radio stations”).
2Press PROG.
3Press S / T to select a preset number that you want to store the current radio station.
4Press PROG again to store.
Selecting a preset radio station
●Press TUNER on the remote, then press S / T to select a preset number (or use the numeric keypad on the remote).
➜ The waveband, preset number followed by radio frequency will appear.
Deleting a preset radio station
1In tuner mode, press S / T on the remote to select a preset radio station.
2Press and hold 9 until “FM/MW X DELETED” appears.
➜“X” is the preset number.
➜The radio station continues to play but has been deleted from the preset list.
➜The rest of the preset radio station number remain unchanged.
Changing tuning grid (not available
for all versions)
In some countries, the frequency step between adjacent channels in the MW/FM band is 9 kHz/50 kHz (10 kHz/ 100 kHz in some areas). The preset frequency step in the factory is
9 kHz/50 kHz.
IMPORTANT!
Changing the tuning grid will erase all previously stored preset radio stations.
1Press SOURCE to select “FM” or “MW”.
2Press STANDBY ON to switch the DVD system to standby mode.
3Press STANDBY ON again to turn on the DVD system and hold down S button on the front panel.
➜The display will show "GRID 9" or "GRID 10".
Helpful Hint:
–GRID 9 and GRID 10 indicate that the tuning grid is in step of 9 kHz and 10 kHz respectively.
E n g l i s h
41
41 | 15/06/05, 1:20 PM |