Philips SVD100 owner manual Back of TV Example only DVD Player

Page 12

12 Hookups (cont’d)

Connecting to a TV and an Amplifier with Digital Input jacks, Mini-Disc Deck or

Digital Audio Tape Deck

●Use a coaxial digital audio cable (not supplied) for this connection.

●If the Disc is recorded in 5.1 channel Dolby Digital Surround, you cannot dub the Disc in digital sound using a Mini-Disc or Digital Audio Tape Deck.

●Set DOLBY DIGITAL and DTS to OFF on the DVD Player. Details are on pages 38-39.If you play a DVD when the settings are wrong, the sound will be distorted or you may damage the speakers.

2

1

VIDEO IN

Back of TV

(example only)

DVD Player

DIGITAL AUDIO OUT	AUDIO OUT
PCM/BITSTREAM
COAXIAL
S-VIDEO	VIDEO R	L
OUT	OUT

1	COAXIAL DIGITAL	Back of Amplifier

		(example only)
	AUDIO IN

Connect a coaxial digital audio cable to the COAXIAL jack on the DVD Player and to the COAXIAL DIGITAL AUDIO IN jack on the Amplifier.

2

Connect the supplied video cable (yellow) to the VIDEO OUT jack on the DVD Player and to the VIDEO IN jack on the TV. (Or, you may con- nect an optional S-Video cable to the S-VIDEO OUT jack on the DVD Player and to the S-VIDEO IN jack on the TV.)

3

Plug in the Amplifier’s power cord. Turn on the Amplifier and select the Auxiliary IN station. During Disc playback, you will adjust the volume at the Amplifier. See your Amplifier owner’s manual for details.

4

Plug in the TV’s power cord. Turn on the TV and set it to the Video In channel (or S-Video In channel). This channel usually is located near channel

00.During Audio CD playback, you may check the status of the Disc on your TV screen. During DVD playback, you will watch the program on the TV. See your TV owner’s manual for details.

5

Plug in the DVD Player’s power cord. Press the POWER button to turn on the DVD Player. “HELLO” will appear briefly on the DVD Player’s display panel. You should see the DVD logo on the TV. If you do not, check your connec- tions and make sure the TV is on the correct channel.

Image 12

Contents Digital Video Disc Player Warranty Verification For Customer UseSafety Information Table of Contents Introduction Playable Discs Playable DiscsRegion Codes Color SystemsRemote Control Setup Putting Batteries in the Remote ControlUsing the Remote Control Recycling Guidelines/Battery SafetyHookups DVD PlayerHookups cont’d DVD PlayerConnecting to a TV and a Stereo Connecting to a Dolby Digital Decoder or DTS Decoder Back of TV Example only DVD Player DVD Player Display Display MessagesDisplay Disc loading trayFront Panel AC Power Cord Audio OUT Jacks Rear PanelCoaxial Jack Remote Control Buttons Title ButtonReturn Button Subtitle ButtonPlaying a Disc Playing a DVD or an Audio CDBefore you begin Press the OPEN/CLOSE button to open the Disc trayUsing the DVD Menus Using the Title MenuPausing Playback Where playback stoppedMemory On Resuming playback from the pointStep by Step Playback Fast Forward/Reverse Search Press the Play button to return to normal playbackSlow Motion Press the PAUSE/STILL button during playbackTrack Playback Starting Playback at a Specific TrackWhen playback is stopped, press the Number buttons to Title/Chapter PlaybackStarting Playback at a Specific Title/Chapter Press the Search Mode button repeatedly three times Specific Time PlaybackStarting Playback at a Specific Disc Time Repeat Playback 42-4 B Repeat PlaybackProgrammed Playback Random Playback While the Random screen appears, press the Play butSound Mode DVD LanguageSubtitle Language Subtitle menu will disappear after about 15 secondsCamera Angles Parental Lock Password While playback is stopped, press the Setup button.Press the Number buttons to enter the 4-digit password Press the Number buttons to enter your 4-digit password Parental Lock LevelsPress the Number 1 button to select Level Accessing the Status Display Status DisplayVideo Settings Press the Number 2 button to select VideoAudio Settings Go to to change these settingsPress the Number 3 button to select Audio Press the corresponding Number button to select anAudio Settings cont’d Language Settings Press the Number 1 button to select LanguageLanguage Settings cont’d Press a Number button to select a settingLanguage Settings cont’d Language Country CodeOther Menu Settings Press the Number 5 button to select OthersHelpful Hints Helpful Hints cont’d Care and Maintenance Cleaning the DVD PlayerCleaning a Disc Checking the LaserGlossary Specifications Limited Warranty DVD PlayerIndex 38-39Page Supplied Accessories