Antenna grounding, Important Safety Notes

GROUND CLAMP

ELECTRIC

SERVICE

EQUIPMENT

ANTENNA

LEAD-IN WIRE

ANTENNA DISCHARGE UNIT* (NEC SECTION 810-20)

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

Antenna grounding

If an outside antenna is connected to the receiver, make sure the antenna system is grounded so as to provide protection against volt- age surges and built up of static charges.

Section 810 of the National Electrical Code,ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding connectors, location of antenna dis- charge-unit, connection to grounding electrodes, and requirements for the grounding electrode. See DIAGRAM TO LEFT.

Important Safety Notes

If you do not feel comfortable or competent to install this antenna we

POWER SERVICE

GROUNDING ELECTRODE

SYSTEM (NEC ART250, PART H)

Example of Antenna Grounding as per NEC – National Electrical Code

* Antenna Discharge Unit is not required if lead in conductors are enclosed in a continuous metallic shield that is permanently and effectively grounded.

IMPORTANT

READ

BEFORE

INSTALLATION

recommend that you seek the assistance of a qualified professional antenna installer.

Read the instructions for this device thoroughly before attempting installation.

The installation or dismantling of any antenna near power lines is dangerous. Each year hundreds of people are killed or injured while attempting to install or service antennas. For your safety and proper antenna installation, read and follow all safety precautions.

Outdoor antennas and lead-in conductors from antenna to a building should not cross over open conductors of electric light or power circuits. They should be kept away from all circuits to avoid the possibility of accidental contact.

Each conductor of a lead-in from an outdoor antenna should be con- nected with an antenna discharge unit. Antenna discharge units (or Lightning Arrestors) should be located outside the building between the point of entrance or the lead-in and the TV, and as near as practi- cal to the entrance of conductors to the building.

Choose an installation site for safety as well as performance.

All electric power lines, cable lines and telephone lines look alike.To be safe, assume ANY overhead line can kill you.

Do not place an antenna where it could potentially fall on to, or blow into a power line. If in doubt call your electric provider. Let them review your site.

SDV2950/27 specifications

The Philips SDV2950/27 is a compact, high-performance indoor digital TV antenna designed to enhance television viewing experiences by providing high-quality reception of digital signals. With its sleek and modern design, it caters to a wide range of users who seek both functionality and aesthetics in their entertainment setups.

One of the standout features of the Philips SDV2950/27 is its ability to receive both VHF and UHF signals, which allows it to pick up a variety of channels in different frequency ranges. This versatility ensures that users can access a comprehensive array of TV broadcasts, making it an ideal choice for cord-cutters looking to enjoy free over-the-air programming. The antenna's integrated amplifier boosts the signal strength, significantly increasing the likelihood of receiving clearer images and sound.

Another key characteristic of the Philips SDV2950/27 is its ease of installation. Users can set it up quickly without the need for extensive technical knowledge. The antenna comes with a user-friendly setup guide that walks users through the installation process, allowing them to connect it directly to their television with minimal effort. Additionally, the antenna's lightweight design makes it easy to maneuver and position for optimal signal reception.

The Philips SDV2950/27 is equipped with SmartScan technology, which simplifies the channel scanning process. This feature allows users to easily find all available channels in their area at the push of a button. Once the scanning is complete, users can enjoy a broad selection of their favorite shows, movies, and news, all in stunning clarity.

The antenna supports multiple mounting options, including being placed on a shelf, mounted on a wall, or positioned near a window for maximum reception. It is also compatible with both standard and HD televisions, ensuring that a wide range of users can benefit from its capabilities.

Built with quality materials, the Philips SDV2950/27 is designed for durability and reliable performance. It can withstand varying environments, making it suitable for indoor use in different settings, whether in an apartment, house, or office.

Overall, the Philips SDV2950/27 Indoor Digital TV Antenna represents an excellent choice for those seeking an efficient, easy-to-use solution for enhancing their television viewing experience, bringing them closer to their favorite programming with clarity and convenience.