Philips SDV2950/27 user manual Mast Mounting or Attic Mounting Mast not included

Page 6

EN

Fig B

Fig C

6

2.Attach the cable to the F connector on the underside of the unit and slide the weather protection boot over the connection.

3.Hook the top of the L brackets onto the wood screws through the keyholes. Make sure the screws are at the top of the keyhole. At this point tighten the wood screws fully into position and tighten the L bracket screws.

Mast Mounting or Attic Mounting (Mast not included)

Do all the antenna assembly work on the ground. Raise the completed antenna after assembly.

1.Install the two U-bolt s from the rear of the main bracket.

2.Attach the main bracket to the antenna assembly using the 6 - 1/2” washer screws as shown in Figure B above.

3.Attach the U-Bolt clamps with the pointed side facing outward.

4.Place the 4 wing-nuts on the threads of the U-bolts – loosely allowing space for the mast.

5.Slide the top of the mast under the clamps – and fully tighten the wing-nuts.The completed assembly should look like figure C.

6.Attach the cable to the F connector on the underside of the unit and slide weather protection boot over the connection.

7.Attach the mast to the mast mount and fasten hardware for the mast (not included).

As previously noted the power injector must be placed in-line between the antenna and before any splitter or additional devices.

1.Connect the coaxial cable from the antenna to the F connector labeled “TO AMPLIFIER” on the power injector.

2.Connect the short lead from the power injector to the antenna input on your TV.

3.Connect the power supply lead to the power injector, then plug the power supply into a 110/120 Volt AC receptacle.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents SDV2950/27 Manual De Utilizador Manuel dutilisation Page Important Safety Notes Antenna groundingImportant installation information Parts included Mast Mounting or Attic Mounting Mast not included Limited one-year warranty Alternate connectionsTechnical Support Page Conexión a tierra de la antena Notas importantes de seguridadInformación importante sobre la instalación Partes incluidas Montaje de mástil o attico mástil no incluido Conexión de su TV Conexiones alternativasGarantía limitada por un año Asistencia TécnicaPage Mise à la terre de lantenne Remarques importantes en matière de sécuritéPage Renseignements importants concernant linstallation Pièces inclusesInstallation sur un mât Mât non compris Fig C Autres méthodes de connexion Garantie limitée d’un anSoutien technique Koninklijke Philips Electronics N.V., All rights reserved

SDV2950/27 specifications

The Philips SDV2950/27 is a compact, high-performance indoor digital TV antenna designed to enhance television viewing experiences by providing high-quality reception of digital signals. With its sleek and modern design, it caters to a wide range of users who seek both functionality and aesthetics in their entertainment setups.

One of the standout features of the Philips SDV2950/27 is its ability to receive both VHF and UHF signals, which allows it to pick up a variety of channels in different frequency ranges. This versatility ensures that users can access a comprehensive array of TV broadcasts, making it an ideal choice for cord-cutters looking to enjoy free over-the-air programming. The antenna's integrated amplifier boosts the signal strength, significantly increasing the likelihood of receiving clearer images and sound.

Another key characteristic of the Philips SDV2950/27 is its ease of installation. Users can set it up quickly without the need for extensive technical knowledge. The antenna comes with a user-friendly setup guide that walks users through the installation process, allowing them to connect it directly to their television with minimal effort. Additionally, the antenna's lightweight design makes it easy to maneuver and position for optimal signal reception.

The Philips SDV2950/27 is equipped with SmartScan technology, which simplifies the channel scanning process. This feature allows users to easily find all available channels in their area at the push of a button. Once the scanning is complete, users can enjoy a broad selection of their favorite shows, movies, and news, all in stunning clarity.

The antenna supports multiple mounting options, including being placed on a shelf, mounted on a wall, or positioned near a window for maximum reception. It is also compatible with both standard and HD televisions, ensuring that a wide range of users can benefit from its capabilities.

Built with quality materials, the Philips SDV2950/27 is designed for durability and reliable performance. It can withstand varying environments, making it suitable for indoor use in different settings, whether in an apartment, house, or office.

Overall, the Philips SDV2950/27 Indoor Digital TV Antenna represents an excellent choice for those seeking an efficient, easy-to-use solution for enhancing their television viewing experience, bringing them closer to their favorite programming with clarity and convenience.
Top Page Image Contents