CONNECTIONS
HDMI Mode and Actual Output Signals
Press [OUTPUT] on the front panel to change the resolution of the video signal being output from the HDMI OUT. The video resolution changes as follows every time [OUTPUT] is pressed. Or change the setting in the “HDMI Video Resolution” in the settings menu.
Front Panel Display HDMI Video Resolution
480 Progressive
Press [OUTPUT]
720 Progressive
Press [OUTPUT]
1080 interlaced
Press [OUTPUT]
1080 Progressive
Press [OUTPUT]
Copyright protection system
To play back the digital video images of a
* HDMI: High Definition Multimedia Interface
Note
•When using
•The audio signals from the HDMI jack (including the sampling frequency, the number of channels and bit length) maybe limited by the device that is connected.
•Among the display device(s) that support HDMI, some do not support audio output (for example, projectors). In connections with device such as this unit, audio signals are not output from the HDMI output jack.
•When this unit’s HDMI jack is connected to a
•Pressing [OUTPUT] does not work when HDMI cable is not connected, or when no video signal is being output from the HDMI OUT jack.
•Pressing [OUTPUT] does not work during the playback of a
•When you make a selection, the TV monitor temporarily goes blank and then comes back again. If it does not, press [OUTPUT] repeatedly to change the resolution or press and hold [B(PLAY)] on the front panel for 5 seconds to change the setting back to its default.
Introduction Connections Basic Setup Playback Function Setup Others
EN 15
E5E10UD_EN.indb 15
12/28/2007 9:25:42 AM