PRECAUTIONS
Supplied Accessories
Remote Control | RCA Audio/Video | AC Cord |
With Batteries | Cables |
|
(AAx2) |
|
|
User Manual | Quick Start Guide Registration Card |
User Manual |
Maintenance
Servicing
•Please refer to relevant topics on “TROUBLESHOOTING” on page 40 before returning the product.
•If you need to call a customer service representative, please know the model number and serial number of your product before you call. This information is displayed on the back of the product. Also, please take a moment to identify the problem you are having, and be prepared to explain this to the representative. If you believe the representative will need to help you with operations, please stay near the product. Our representatives will be happy to assist you. For online reference, please visit our web site at http://www.philips.com/welcome
Cleaning the cabinet
•Wipe the front panel and other exterior surfaces of the unit with a soft, slightly damp cloth.
•Never use a solvent, thinner, benzene or alcohol to clean the unit. Do not spray insecticide liquid near the unit. Such chemicals may discolor the surface or damage the unit.
Cleaning discs
•When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.
•Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.
Cleaning the disc lens
•If this unit still does not perform properly although you refer to the relevant sections and to “TROUBLESHOOTING” in this user manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.
Disc handling
•Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.
•Always store the disc in its protective case when it is not used.
•Note that discs with special shapes
Installation Location
For safety and optimum performance of this unit:
•Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV.
•Shield it from direct sunlight and keep it away from devices of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields.
•Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
Moisture Condensation Warning
Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or after heating a cold room or under conditions of high humidity. Do not use this unit at least for 2 hours until its inside gets dry.
Trademark Information
Manufactured under license from Dolby Laboratories. Dolby and the
HDMI, the HDMI logo and
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Surround are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. ©
Java and all other Java trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and/or other countries.
Windows Media is a trademark of Microsoft Corporation.
are trademarks. |
is a trademark of DVD Format/Logo Licensing Corporation.
DivX, DivX Certified, and associated logos are trademarks of DivX, Inc. and are used under license.
EN 5
Introduction Connections Basic Setup Playback Function Setup Others
E5E10UD_EN.indb 5
12/28/2007 9:25:37 AM