3 Change settings
This section helps you to change the settings of this player.
1
2
TV type | Multi |
|
|
|
|
3 |
|
|
| |
Watch 3D video | ||||
|
|
Note
You cannot change a menu option that is grayed out.
To return to the previous menu, press 
. To exit the menu, press 
.
Picture
1 Press 
.
2 Select [Setup] > [Video] to access the video setup options.
[TV type] 6HOHFWDFRORUV\VWHPWRÀW your TV.
[TV display]: Select a picture display IRUPDWWRÀWWKH79VFUHHQ
[HDMI video]: Select an HDMI video resolution.
[HDMI Deep Color]: Display colors with more shades and hues when the video content is recorded in Deep Color and the TV supports this feature.
[Picture settings] 6HOHFWDSUHGHÀQHG color setting.
[Watch 3D video]: Set to 3D or 2D output when playing a
Note
If you change a setting, make sure that the TV supports the new setting.
For settings related to HDMI, the TV must be connected through HDMI.
For the composite connection (via the VIDEO connector), select a video resolution of 480i/576i or 480p/576p under [HDMI video] to enable video output.
Sound
1 Press 
.
2 Select [Setup] > [Audio] to access the audio setup options.
[Night Mode]: Select quiet or full dynamic sound. Night mode decreases the volume of loud sound and increases the volume of soft sound (such as speech).
[HDMI Audio]: Set an HDMI audio format when this player is connected through HDMI.
[Digital Audio]: Select an audio format for the sound output when this player is connected through a digital connector (coaxial).
[PCM Downsampling]: Set the sampling rate for PCM audio output when this player is connected through a digital connector (coaxial).
Note
For settings related to HDMI, the TV must be connected through HDMI.
Night mode is only available for Dolby encoded DVD and
EN 17