E n
DVD Setup Menu Options
LPCM Output |
| Night Mode - turning on/off |
g l i s h
If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust ‘LPCM Output’. Discs are recorded at a certain sampling rate.The higher the sampling rate, the better the sound quality.
|
|
|
|
|
|
|
| Language | Video |
| Audio | Rating |
|
| Digital Output |
| PCM |
|
| |
| LPCM Output |
| 48Khz | 48Khz |
| |
| Night Mode |
| On | 96Khz |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1In ‘AUDIO SETUP’, press OK to enter the submenu.
2Press 3 4 to highlight {LPCM Output}, then press OK.
3Press 34to highlight one of the options below:
48kHz
Playback a disc recorded at the sampling rate of 48kHz.
96kHz
Playback a disc recorded at the sampling rate of 96kHz that can only be achieved in
4Select an item and press OK.
Helpful Hint:
–LPCM Output can be selected only when PCM is activated.
In this mode, the high volume outputs are softened and low volume outputs are brought upward to an audible level. It is useful for watching your favourite action movie without disturbing others at night.
|
|
|
|
|
|
|
| Language | Video |
| Audio | Rating |
|
| Digital Output |
| PCM |
|
| |
| LPCM Output |
| 48Khz |
|
| |
| Night Mode |
| On | On |
| |
|
|
|
|
| Off |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1In ‘AUDIO SETUP’, press OK to enter the submenu.
2Press 3 4 to highlight {Night Mode}, then press OK.
3Press 34to highlight one of the options below:
ON
Select this to level out the volume. This feature is only available for movies with Dolby Digital mode.
OFF
Select this when you want to enjoy the surround sound with its full dynamic range.
4Select an item and press OK.
TIPS: To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.
24
24 | 3139 246 14374 | |
23/12/2004, 6:04 PM |