Philips 425 user manual Troubleshooting, Problem Solution

Page 28

E n g l i s h

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair.

Problem

Solution

No power

Check if the AC power cord is properly connected.

 

Press the STANDBY ON on the front of the DVD

 

 

system to turn on the power.

No picture

Refer to your TV’s manual for correct Video In

 

 

channel selection. Change the TV channel until you

 

 

see the DVD screen.

 

– Check if the TV is switched on.

Distorted picture

Sometimes a small amount of picture distortion may

 

 

appear depending on the disc being played back.This

 

 

is not a malfunction.

Completely distorted picture or

Connect DVD Player directly to the TV.

black/white picture with DVD

Make sure the disc is compatible with the DVD/

 

 

Player.

 

– Ensure that the DVD Player’s TV Type is set to match

 

 

that of the Disc and your TV.

No sound or distorted sound

Adjust the volume.

 

Check that the speakers are connected correctly.

No audio at digital output

Check the digital connections.

 

Check if your receiver can decode MPEG-2 or DTS

 

 

and if not, please make sure the digital output is set

 

 

to PCM.

 

Check if the audio format of the selected audio

 

 

language matches your receiver capabilities.

No sound and picture

Check that the RGB/SCART cable is connected to

 

 

the correct device (See Connecting TV).

Disc can’t be played

The DVD+R/CD-R must be finalised.

 

Ensure the disc label is facing up.

 

Check if the disc is defective by trying another disc.

 

If you have recorded a Picture CD or MP3 CD

 

 

yourself, ensure that your disc contains at least 10

 

 

pictures or 5 MP3 tracks.

 

Region code incorrect.

Picture freezes momentarily

Check the disc for fingerprints/scratches and

during playback

 

clean with a soft cloth wiping from centre to edge.

No return to start-up screen when

Reset the unit by switching the player off, then on

disc is removed

 

again.

 

 

 

28

01-30 XDV425_EU_004

28

3139 246 14374

23/12/2004, 6:04 PM

Image 28
Contents Model Important notes for users in the U.K Mains plugKlass 1 laseraparat Laser safety General InformationEnvironmental Information LaserEnglish IndexDeutsch Nederlands Español 109 Contents Care and safety information Supplied accessoriesIntroduction Using Composite Video jacks Cvbs Using Scart jackConnections Connecting the power cord Using an accessory RF modulatorOptional Connecting Digital AV Receiver Optional Connecting to an Audio SystemReceiver has a PCM, Dolby Digital, or MPEG2 decoder Functional Overview Front and Rear PanelsRemote Control Inserting batteries into the Remote Control Setting up the TVUsing the Remote Control to operate the Player Getting StartedSelecting the colour system that corresponds to your TV Setting the TV DisplayPress System Menu Setting the OSD Language Setting language preferenceSetting the Audio, Subtitle and DVD menu language Disc Operations Playable DiscsRegion Codes Your DVD Player will playUsing the Disc Menu To select a playback feature or itemTo access or exit from the menu For VCD with Playback Control PBC feature version 2.0 onlyBasic playback controls Play BSlow Motion DVD/VCD Forward / Reverse Searching DVD/VCD/CDPreview DVD/VCD For DVDSpecial DVD features Playing MP3/JPEG Picture CDPlayback selection RepeatZoom picture Jpeg Playback with multi-angles JpegVideo Setup DVD Setup Menu OptionsLanguage Audio Setup Digital OutputOFF ALL48kHz Lpcm Output Night Mode turning on/off96kHz Changing the Password RatingRestoring to original settings Setting the RatingRating explanations Specifications Audio FormatTroubleshooting Problem SolutionTroubleshooting Glossary