Tuning to radio stations
1Press TUNER to select TUNER mode.
ª"TUNER" will be displayed.
A few seconds later, the current frequency is displayed.
2Press TUNER (BAND) again to select the desired waveband : FM or AM.
3Press TUNING ˆor ‡for more than one second, then release.
ªThe display will show ‘SEARCH’ until a radio station with sufficient signal strength is found.
•Repeat this procedure until the desired station is reached.
•To tune to a weak station, briefly press TUNING ˆor
‡until the display shows the desired frequency and/or when the best reception has been obtained.
Storing Preset Stations
You can store up to 40 radio stations in the memory. When a preset radio station is selected, the preset number appears next to the frequency on the display.
Automatic programming
1Press TUNER.
2Press TUNER (BAND) again to select the desired waveband : FM or AM.
3Press PROGRAM for more than one second.
ªPROGRAM flag starts flashing and ‘AUTO’ will be displayed.
ªEvery available station for the selected waveband will be stored automatically. The frequency and preset number will be displayed briefly.
ªThe system will stop searching when all the available radio stations are stored or when the memory for 40 preset radio stations is used.
ªThe system will remain tuned to the last stored preset radio station.
•Repeat the above procedure to store other preset radio stations for the other waveband. Remember to select the next available preset number before proceeding. If not, some of the preset radio stations may be erased.
Notes:
–You can cancel the automatic programming by pressing PROGRAM or STOP•CLEAR ‚on the system only.
–If you want to reserve a section of preset numbers, for example preset numbers 1 to 9, select preset 10 before starting automatic programming: now only the preset numbers 10 to 40 will be programmed.
Manual programming
1Press TUNER.
2Press TUNER (BAND) to select the desired waveband : FM or AM.
3Press PROGRAM for less than one second.
ªPROGRAM flag, the frequency and preset number start flashing.
ªThe next available preset number will be displayed for selection.
4Press TUNING ˆor ‡to tune to the desired
frequency.
•If you wish to store the radio station to another preset number, press PRESET 4 or 3 to select the desired
preset number.
5Press PROGRAM again.
ªPROGRAM flag will stop flashing, and the radio station will be stored.
TUNER
•Repeat the above procedure to store other preset radio stations.
Notes:
–When 40 radio stations are stored and you attempt to store another radio station, the display will show
" PROGRAM FULL”. If you want to change an existing preset number; repeat steps 4 and 5.
–You can cancel manual programming by pressing STOP•CLEAR ‚on the system only.
–During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically.
Tuning to Preset Radio Stations
•Press PRESET 4 or 3 to select the desired preset number.
ªThe preset number, frequency and waveband appear on the display
English
19