Button Functions
1.
2.
Button Functions, cont.
1.Red Indicator Lights when any button is pressed.
2.TV, VCR/DVD, CBL Selects product to be oper-
17.ated. QUIT Used to exit menu functions.
3.MUTE Turns off the TV sound while the picture
16.remains. OK Selects menu items for the device you are controlling.
3. | 15. | 4. | INFO/SELECT Displays/selects | |
| information, etc. | |||
|
|
| ||
4. | 14. | 5. | CODE SEARCH Used for setup. | |
6. | SLEEP Turns off the TV after a period of 1 to 99 | |||
5. | 13. |
| minutes. | |
7. | NUMBERS Enter numbers for direct channel | |||
|
|
| selection. Some products require Enter to be | |
6. | 12. | 8. | pressed after channel selection. | |
|
| ENTER Used after direct channel number entry to | ||
7. | 11. |
| immediately change to the selected channel. | |
9. | SCAN + and SCAN - buttons control the speed of | |||
|
| |||
8. | 10. |
| Fast Forward and Reverse Playback respectively in | |
| DVD mode. | |||
|
| 10. | RECORD, PLAY, STOP, REW, FF, PAUSE |
9.
Note: The REC button must be pressed TWICE to record from your VCR. For some brands of VCRs, you might need to press the REC button once, then press it again for three seconds.
Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. PREV.CHAN may be called RECALL, or ENTER may be called DISPLAY. These differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your product. E.G., your product must have PREV.CHAN ability for the PREV.CHAN button to operate this feature.
VCR control buttons operate your VCR even when the remote is set to operate the TV. Also operates DVD Scan
11.TV/VCR/INPUT For some TVs, press repeatedly to select from available viewing sources (antenna, cable box, VCR, etc.).
12.CC (SUBTITLE) TV Closed Caption (if your TV has this feature) or DVD Subtitle toggle.
13.PREV. CHAN Returns to the previously selected channel, or DVD repeat toggle.
14.MENU IN/OUT Toggles in and out of menu mode. Accesses the Menu functions of the device you are controlling.
15.VOLUME UP/DOWN Changes the volume level of the product, normally the TV.
16.CHANNEL UP/DOWN Changes the channels. CHAPTER +/- controls DVD/CD track selection i.e. DVD/CD Track Skip Up/Down (in DVD and SAT modes). Note the VCR buttons also control DVD when in DVD Mode.
17.POWER Turns product On or Off.
4 | 5 |