Philips sbc ru 110 manual Make a Note of Your Code

English

Instructions for use

MAKE A NOTE OF YOUR CODE!

A D V I C E

Carefully read the complete procedure before starting!

Note the code inside the battery case and in the codelist of this booklet. This may be useful if you ever need to set up the SBC RU110 again. You used the auto search procedure or you forgot to note the code after set up? No problem! You can still ‘read out’ the code from the remote:

1 Press and hold keys mute and power simultaneously for about 3 seconds.

–The green LED lights up.

2 Press the mute key.

–The green LED goes out.

3 Press key P+ and count the number of times the green LED flashes. This is the first digit of the 5-digit code. (No flashes means the digit is zero.)

4 Press key P– and count the number of flashes for the second digit.

5 Press key Vol+ and count the number of flashes for the third digit.

6 Press key Vol– and count the number of flashes for the forth digit.

7 Press mute key and count the number of flashes for the fifth digit.

8 Note the code.

4