Troubleshooting Guide, Need HELP?, Problem

Instructions for use

TROUBLESHOOTING GUIDE

•Problem:

– Solution:

•TV is not responding and the green light does not flash when you press a button.

–Replace batteries with two new 1.5 volt, type RO3, UM4 or AAA batteries.

•TV is not responding, but the green light does flash when you press a button.

–Aim the SBC RU110 at the TV and be sure that there are no obstructions between the SBC RU110 and the TV.

• The SBC RU110 is not performing commands properly.

–You may be using the wrong code. Try repeating Set up using another code, listed under your brand, or start the Autosearch Set-up over again to locate the proper code.

If the TV still doesn’t respond, call the help-line and we’ll put you back on track.

•Your brand is not listed in the code list.

– Try the hands-free Autosearch method.

English

NEED HELP?

If you have any questions about the SBC RU110, please call our help-line for assistance! You can find the number in the code list section of this booklet.

Before you call, please read this manual carefully. You will be able to solve most of your problems. If you don’t find an answer to your questions, make a note of your TV in the table at the back of the code list section of this booklet. This makes it easier and faster for our operators to help you. Look for the model number in the TV instruction manual, or on the back of your TV. When calling our help-line please have your TV close by, so our operators can help you verify the functionality of your remote control.