HOOKING UP YOUR TV (BASIC CABLE TV CONNECTIONS)
CABLE TV | SMART | |
our Cable TV input into your | HELP | |
Yhome may be a single (75 | Remember: | |
ohm) cable, or a Converter Box | Set the TV for the | |
installation. In either case the | type signal you've | |
connection to the TV is very easy. | just connected (see | |
Just put the threaded end of the | the “Tuner” section | |
cable signal to the TV's antenna | on page 11 of this | |
manual.) | ||
plug and screw it down tight. | ||
| ||
BEGIN | To select only the | |
If your Cable TV signal is a sin- | ||
channel numbers on | ||
gle round cable (75 ohm) then | your Cable system | |
you're ready to connect to the TV. | see “Auto Program" | |
If you have a Cable Converter | (page 12). If you use | |
Box: | a Cable Converter | |
Connect the Cable TV signal to the | box, set the TV to the | |
Cable Signal IN(put) plug on the | same channel as the | |
Converter.. | converter's CH 3/4 | |
| 75 V | |
Connect the Cable TV cable to the | switch (on the rear of | |
the converter.) | ||
75Ω plug on the TV. | ||
| ||
If you have a Cable Converter Box: |
| |
Connect the OUT(put) plug from the |
| |
Converter to the 75Ω plug on the TV. |
|
Cable TV Company
1
Cable TV Signal Input
VIDEO
OR
IN
75 V
AUDIO
Back of TV
IN | OUT |
|
Round Cable | 2 | |
75Ω Ohm | ||
|
Cable TV Converter
Box Connection
5