You can change which Volume / Mute buttons are used for a device (e.g. use the Volume buttons of the amplifier to control the volume of the DVD player).
3.4.1Setting Volume / Mute control for all devices to any single device
You can set all devices to use the Volume / Mute buttons of a single device without needing to change to that device mode.
1Press and hold the SETUP button until the red light indicator turns on, then release the button.
2Press and hold the MUTE button until the red light indicator flashes off, then release the button.
3Press and release the desired device Mode button (TV, DVR, etc.) for Volume / Mute control, the red light indicator flashes then remains lit.
4Press and release the MUTE button.
•The red light indicator turns off.
•The red light indicator will blink rapidly for three seconds if the device you have selected has no Volume / Mute control.
•All other devices will now use the Volume / Mute buttons of the selected device.
5Press and release the MUTE button.
•The red light indicator turns off.
•The selected device will now use its own Volume / Mute control.
Using the remote control English
4 Using the remote control
4.1Controlling devices requiring separate Power On / Off buttons
Some devices (e.g. certain RCA TVs) require separate Power On and Power Off buttons to turn the device on and off.
The equivalent button functions can be found on your Philips remote control.
1Turn on the device by pressing the corresponding Mode button for more than 1 second.
2Press and release the POWER (y) button to turn off the device.
Notes
•This method can be applied similarly to any device and is available for all device modes.
•Note that this feature is not supported by all codes.
4.2 Controlling combo devices
Some combo devices (e.g.TV / DVR,TV / DVD, DVD / DVR, etc.) have separate buttons on the original remote control to select the part of the combo device to be controlled.
For example, if your combo device is a TV / DVD then its original remote control might have separate TV and DVD buttons for selection of the combo part you wish to operate.The equivalent button functions can be found on your Philips remote control by using the device Mode and SETUP buttons.
EN 9
129238_SRU5107_Short.indd 9 |