Philips SRU2103S/27 Button Functions Button Functions, RECORD, PLAY, STOP, REW, FF, Pause

Button Functions

Button Functions, cont.

		1.	Red Indicator Lights when any button is pressed.
1.	19.	2.	TV, VCR/DVD, CBL Selects product to be oper-
			ated.
		3.	NUMBERS Enter numbers for direct channel
2.	18.		selection. Some products require Enter to be
			pressed after channel selection.
3.	17.	4.	ENTER Used after direct channel number entry to
			immediately change to the selected channel.
4.	16.	5.	QUIT Used to exit menu functions.
		6.	MENU brings up the DVD disc Menu screen - use
5.	15.		with the UP, DOWN, LEFT & RIGHT navigation
			buttons.
		7.	VOLUME UP/DOWN Changes the volume level of
6.	14.	8.	the product, normally the TV.
			OK Selects menu items for the device you are
7.	13.		controlling.
		9.	MUTE Turns off the TV sound while the picture
8.	12.		remains.
		10.	SLEEP Turns off the TV after a period of 1 to 99

minutes.

9.11.

10.

Note: The REC button must be pressed TWICE to record from your VCR. For some brands of VCRs, you might need to press the REC button once, then press it again for three seconds.

11.RECORD, PLAY, STOP, REW, FF, PAUSE

VCR control buttons operate your VCR even when the remote is set to operate the TV. Also operates DVD Scan -/+.

12.PREV. CHAN Returns to the previously selected channel, or DVD repeat toggle. REPEAT performs DVD players “A-B Repeat” (or RPT A.B) function for repeat play of current Chapter or Track.

13.CC (SUBTITLE) TV Closed Caption (if your TV has this feature) or DVD Subtitle toggle.

14.UP, DOWN, LEFT & RIGHT navigation buttons.

15.CHANNEL UP/DOWN Changes the channels. CHAPTER +/- controls DVD/CD track selection, i.e., DVD/CD Track Skip Up/Down (in DVD and SAT modes). Note the VCR buttons also control DVD when in DVD Mode.

16.INFO/SELECT Displays/selects on-screen channel information, etc.

Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G., PREV.CHAN may be called RECALL, or ENTER may be called DISPLAY. These differences depend on the brand and model of your product. Also, this remote can only operate features that exist on your product. E.G., your product must have PREV.CHAN ability for the PREV.CHAN button to operate this feature.

17.TV/VCR/INPUT For some TVs, press repeatedly to select from available viewing sources (antenna, cable box, VCR, etc.).

18.SETUP Used for setup.

19.POWER Turns product On or Off.

4 5