Philips SRU4008 owner manual Tips On Learning, IR Transmitter Finder Feature

Page 10

Tips On Learning, cont.

k.Avoid learning your original remote VCR transport buttons unless you are sure these operate the same device e.g. some original TV remotes include VCR button control and can be two different types of code.

l.If learning the first or second buttons for a Mode results in continuous errors then try the following:

i.End the Learn session by pressing the SETUP button.

ii.Clear out the learned commands for that Mode.

iii.Check the IR transmitters are correctly aligned between the two remotes (use the IR Transmitter Finder facility).

iv.Adjust the distance between the two remotes to be closer (e.g. half an inch) or a further away (e.g. 2 inches) from each other.

v.Try learning the original remote for that Mode again.

If problems reoccur with the same button check the original remote button being learned – does it transmit? Does it operate the target device? Try learning that button under a different clear Mode. If it learns okay then it is likely to be a different code type from the others and cannot be learned under the same Mode.

18

IR Transmitter Finder Feature

This feature assists you in identifying where your original remotes IR transmitter is located and is particularly useful if your original remote’s IR transmitter is hidden behind a lens.

1.Point both remotes facing each other by approximately 1 inch apart (see Tips on Learning on previous pages)

2.Press and hold the SETUP button until the red indicator turns on, then release the button.

3.Press and release the desired Mode button (TV, VCR, etc.), the red indicator blinks then stays on.

4.Press and release the LEARN button, the red indicator blinks then stays on.

5.Press and hold any Original Remote button and move the Original Remote to the left and right, and/ or, up and down in front of the Learning remote IR transmitter. The red indicator will remain on if no IR from the Original remote is found and the red indicator will blink on and off more rapidly when the IR transmitters are lining up. The point where the red indicator blinks most rapidly is where the two IR transmitters are aligned. Note some original remotes will only transmit IR on the initial button press then stop. In these cases, quickly press and release the original remote button repeatedly during this procedure.

6.You can now learn a button from your original remote by continuing from “Step 4” in the “Learning Commands” section on the next page, or, to exit at this point, press and release the SETUP button

19

Page 9 Page 11
Image 10
Page 9 Page 11
Contents SRU4008/27 Table of Contents IntroductionButton Functions Button Functions, RECORD, PLAY, STOP, REW, FF, Pause VCRTivo/Replay Functions labeled in Green TiVo code is DVD Functions labeled in BlueSAT Functions Replay code isSetup Code Search Direct Code Entry Code Search,Code Search by Brand Code Identification Feature Sleep Timer Setup, Programming Combo Device CodesSetting ALLVolume/Mute Control to any one Mode Code LearningIR Transmitter Finder Feature Tips On Learning,To Clear all Learned Commands under a mode Learning CommandsClearing Commands Master Clear To Clear all Learned Commands under all modesMacros, To Setup a MacroMacros Macro NotesTroubleshooting Limited Lifetime WarrantyÍndice IntroducciónFunciones de botones ImagenFunciones de DVD con leyendas en azul Replay el código esInstalación de baterías PreparaciónFunciones de audio con leyendas en rojo Ahorrador de bateríasIngreso Directo de Códigos Preparación,Programacíon con Búsqueda de codigos Función de Identificación de Códigos Cronometro de apagado automáticoCódigos de programación de equipos combinados Control de equipos combinadosPreparación, Transferencia de códigos Consejos Para el AprendizajeConsejos Para el Aprendizaje, Aprendizaje de Comandos Despejando Comandos Borrado de macros Programación de una macroCómo programar una macro Notas sobre las macrosEl Control Remoto no Opera su Producto El Control Remoto no Opera Algunas Funciones de su AparatoTable des matières Fonctions des touches Fonctions des touches, Pour enregistrer à partir du magnétoscopeFonctions TiVo/ReplayTV en vert TiVo code DVD Functions labeled in BlueFonctions SAT ReplayTV codeFonctions audio en rouge ConfigurationInstallation des piles Économiseur de pilesConfiguration suite Programmation au moyen de la fonction de recherche des codesFonction d’identification des codes Minuteur de mise en veilleContrôle des combinés Accès direct aux modes VCR/DVD/DVRConfiguration suite Apprentissage de codes Conseils Sur L’ApprentissageConseils Sur L’Apprentissage suite Suppression des commandes Commandes D’EnregistrementPour Effacer Toutes Les Commandes Enregistrees Sous Un Mode Pour enregistrer une macro Pour supprimer une macroGarantie a vie limitée DépannageLe témoin clignote une fois le code programmé

SRU4008 specifications

The Philips SRU4008 is a versatile universal remote control designed to bring convenience and simplicity to managing your entertainment devices. This remote boasts compatibility with up to eight different devices, allowing you to control a wide array of equipment such as TVs, DVD players, Blu-ray players, set-top boxes, and even gaming consoles, all from a single remote.

One of the main features of the SRU4008 is its easy setup and programming process. Users can easily program the remote using the guided setup feature. This involves a simple series of steps that enable you to input the necessary device codes, allowing the remote to communicate with your various electronic devices seamlessly. Furthermore, it supports the Auto Search function, which automatically finds the code for your device, enhancing user convenience.

Another significant aspect of the Philips SRU4008 is its user-friendly layout. The remote is designed with an intuitive button arrangement, ensuring that each function, such as volume control, channel navigation, and playback options, is easily accessible. The keys are well-spaced and labeled, making it easy for users of all ages to operate without confusion.

The SRU4008 is also equipped with an ergonomic design. Its shape fits comfortably in hand, allowing for prolonged use without discomfort, which is particularly advantageous during long viewing sessions. The remote operates on standard batteries, providing extended use before needing replacements.

Advanced technologies incorporated into the Philips SRU4008 include a robust IR transmission, ensuring reliable performance and signal reach to various devices from across the room. This makes it highly effective, even when operating devices situated behind cabinets or in different locations.

Additionally, the SRU4008 features a dedicated button for easy access to essential functions like TV or DVD playback, ensuring you can control your entertainment experience with maximum efficiency. The remote includes options for one-touch direct access to your favorite channels, personalizing your viewing experience.

In summary, the Philips SRU4008 universal remote is a practical solution for managing multiple entertainment devices with ease. With its user-friendly design, advanced programming options, and reliable performance, it enhances your home entertainment experience, making it an excellent choice for any tech-savvy consumer seeking simplicity and convenience.
Top Page Image Contents