To control connected devices | Philips 32PFL9603 manual

13Number keys

To select a TV channel.

14Clock

To display the time on screen.

15Ambilight

To switch Ambilight on or off.

16Mode

To adjust the dynamic effect of Ambilight

17Previous channel R

To return to the previously viewed channel

18+P- Channel up or down

To switch to the next or previous channel in the channel list.

19Menu Ï

To switch the menu on or off

20On screen information i

To show channel or programme information if available.

21Dual screen b

To show teletext on the right and the picture on the left of the screen.

22Subtitle

To activate or deactivate the subtitle mode.

23Widescreen Picture format q

To select a picture format.

24DVD STB HTS

To control connected devices.

See section 10 Index to find the section in the manual about a specific remote control key.

5.1.2Universal remote control

Your TV remote control is a universal remote control that can operate other devices such as DVD players and recorders, digital receivers (Set- top boxes – STB) or Home Theatre Systems (HTS) of Philips and many other brands.

‡Press DVD, STB or HTS to select a DVD, a cable receiver (STB) or a Home Theatre (HTS) device. The key blinks as long as you are in this control.

UNIVERSAL MODE

SOURCE

UNIVERSAL MODE

TELETEXTSUBTITLE

DEMO

®Use the relevant keys on the TV remote control to operate the device.

If the device does not react or operates incorrectly, you need to set up your remote control for your particular device.

See section 5.1.3 Set to operate a particular device.

ÒPress the TV key to return to normal TV mode. When no key is pressed for 30 seconds the remote control switches back to normal TV.

5.1.3Set to operate a particular device You can choose from three ways to programme the remote control for a device of a particular brand. You can:

- use the Universal remote control assistant to help you

- enter a brand's setup code or - start an auto search.

rNote

Possibly the remote control is not compatible with all types of DVD, cable receivers and Home Theatre Systems.

Method 1: Use the Universal remote control assistant

‡Turn on your device.

®Press the DVD, STB or HTS universal mode key for 4 seconds to select the universal mode you need or press Menu Ï and select Setup > Installation > Remote control assistant and press π to enter.

-DVD stands for DVD, DVD-R, HDD and Blu- ray Disc

-STB stands for digital receiver and set-top- boxes (cable, satellite)

-HTS for Home Theatre Systems, Audio/Video

systems

The remote control is now in the selected programming mode. Follow the instructions on screen.

rNote

Ensure that the TV and the device are within reach of the remote control.

Method 2: Enter the setup code directly Instead of using the Universal remote control assistant, you can also enter a setup code directly. Find a list of these codes per brand and device at the end of this manual.

‡Press the DVD, STB or HTS key and OK at the same time for 4 seconds to select the universal mode you need.

®Enter the three-number code for the type and brand of your device. Some brands have several setup codes available and you need to select the known one. You can try them one by one.

ENGLISH

Use more of your TV