Quick install guide
Connecting your DVD Recorder to the TV/Initial installation
Warning ! Until the initial installation has been completed, the buttons on the front will not function.
1Remove the antenna cable jack from your TV. Insert it into the ANTENNA IN jack at the back of the DVD recorder.
2Insert one end of the supplied antenna cable into the TV OUT jack at the back of the DVD Recorder and the other end
into the antenna input jack at the back of the TV.
3 | Connect | the | OUT jacks | or |
VIDEO | (CVBS) OUT / AUDIO L/R | OUT with | the | |
corresponding input jacks of the TV. |
|
| ||
4Switch on the TV.
5Connect the mains jack 4MAINS at the back of the DVD Recorder with the power supply using the supplied power cable.
The most important features of the DVD Recorder will appear on the display. After the initial installation is completed, this function will be switched off.
6Press
7' ' will appear on the display.
8If necessary, select the channel number of the input jack at the TV.
The initial installation menu appears on the screen.
9Select your preferred setting using B or A . Confirm with OK .
The initial installation is carried out automatically. Please wait until the procedure is completed.
ENGLISH
Initial Setup
Menu Language
English
Español
Français
Press OK to continue