Philips DVDR9000H/10 user manual Connect, Similar device, Antenna, Load the TV listing data

1	Connect	2	Set up
	Start with the ‘Basic connection’.
	If you have a VCR, follow the instructions for ‘Connection with VCR or similar device’.

If you have a set-top box, follow the instructions for ‘Connection with set-top box’.

Basic Connection			Connection with VCR or	Connection with set-top box	A Finding the viewing channel	D Install the set-top box
A Before Connecting			similar device	Your new Philips Recorder provides a G-LINK	A Presss STANDBY-ONon the recorder.	If you do not have a set-top box, skip ‘D’ and go to ‘E’.
Unplug the antenna cable that is currently connected to				transmitter which allows you to control the tuner of the	The recorder will display ‘IS TV ON?’.	A Press T down to select ‘External Receiver 1’ and
			A Before Connecting	set-top box (satellite receiver, cable TV box) through	B Switch on the TV.
your TV.						press .
				the GUIDE Plus+ system. You can record the TV
If you have only a single off-air antenna, follow ‘B1’			Your new Philips Recorder replaces the VCR for your		You should see the { EASY SETUP } menu.	B Press	again to continue.
				programmes that are received through the set-top box.
connection.			recording needs. First, unplug all the connections from			C Select the type of reception, service provider and
If you have both the off-air antenna and digital terrestrial			your VCR.			brand name of the connected set-top box.
antenna, follow ‘B2’ connection.						Note	Press to go to the next screen. Select
	B2 Connecting (with digital terrestrial		B Connecting	Connecting
					Note If connected to your VCR, make sure it is
B1 Connecting						{ None } if none of the entries are applicable.
	antenna)
			Television ( rear)	Television ( rear)	turned off before proceeding.	D Select the recorder socket through which your set-
					C If not, press the Channel Down button on the TV’s	top box is connected (e.g. ‘EXT2’ for EXT2 AUX-I/O
Television ( rear)	Television (rear)				remote control repeatedly (or AV, SELECT button)	socket) and press .
			From an off-air		until you see the menu. This is the correct viewing	E Turn on your set-top box and select channel
			antenna or cable box		channel for the recorder.	number 02 on the set-top box.
		From an off-air
						F Read the instructions on the TV and press .
		antenna or cable box

B Start basic setup

From digital

Use the recorder’s remote control and follow the on-

Setup External Receiver 1

From an off-air

terrestrial

screen instructions to complete the installation.

Has the External Receiver 1 changed to

antenna or cable box

antenna

Programme Number 101?

A Select the desired menu language, your country and

the TV shape.

G If the set-top box has switched to the same

Note Select { Done } in the menu and press

to go

programme number as displayed on the TV, select

to the next screen.

{ Yes } in the menu and press .

Philips Recorder

B Activate automatic channel search for analogue and

(rear)

Note If not, select { No } and press

to try a

To source

digital tuner/radio.

different code.

Set-Top Box (rear)

C Check the date and time and press .

H Your set-top box is now installed. Press the green

Philips Recorder (rear)

Philips Recorder (rear)

Positioning of G-LINK

D To continue with the GUIDE Plus+ installation,

button to exit.

transmitter

select { Continue } and press .

VCR or similar

Note To switch the GUIDE Plus+ system’s host

Set-top box

Otherwise, select { Do not install now } and press

device (rear)

. Wait until the recorder has finished initialising

channel manually, go to { Host Channel Setup }.

the system, then press

again.

A Disconnect the antenna cable from your TV and

A Disconnect the antenna cable from your TV and

E Load the TV listing data

connect it to the ANTENNA

socket on this

connect it to the

socket on this recorder.

G-LINK transmitter

C Install the GUIDE Plus+ system

recorder.

B Connect the indoor DVB-T antenna cable to the

A Press GUIDE

to exit GUIDE Plus+ system.

B Use the supplied RF coaxial cable to connect the TV

ANTENNA socket on this recorder.

A Follow step 1 to 5 of ‘Basic connection’ to connect

A Follow step 1 to 5 of ‘Basic connection’ to connect

GUIDE

Leave the recorder in ‘standby’ mode and turn ‘on’

socket on this recorder to the Antenna In socket

B Use the supplied RF coaxial cable to connect the

the set-top box overnight to collect the TV listing

on the TV.

this recorder before you proceed to step 2 below.

this recorder before you proceed to step 2 below.

data, this may take up to 24 hours.

TV

socket on this recorder to the Antenna In

C Use the supplied Tuner interlink cable to connect

Above illustration shown the connection without

Above illustration shown the connection without

socket on the TV.

Note If you tune to your Host Channel before going

the digital terrestrial antenna.

the digital terrestrial antenna.

the two ‘A’-sockets on this recorder.

D Use the supplied scart cable to connect the

to ‘standby’ mode, this recorder will start downloading

B Use another scart cable (not supplied) to connect

B Connect the supplied G-LINK cable to the G-LINK

D Use the supplied scart cable to connect the

the TV listings data immediately.

EXT1 TO TV-I/O scart socket on this recorder to

the EXT2 AUX-I/O scart socket on this recorder to

socket on this recorder.

EXT1 TO TV-I/O scart socket on this recorder to

the SCART IN socket on your TV.

A Follow the on-screen instructions to select your

B Check the { Editor } screen the next day to ensure

the SCART OUT socket on your VCR.

C Place the G-LINK transmitter in front of your set-

the SCART IN socket on your TV.

E Plug in the power cable from the recorder to an AC

C Connect the power cable from the VCR to an AC

language, country and enter the postal code of your

the source and programme numbers are matching

top box in such a way that it can acquire the signal

E Plug in the power cable from the recorder to an AC

power outlet

area.

for all channels.

power outlet.

broadcasted by the transmitter.

power outlet

Note If no or wrong postal code is entered, it will

D Connect the power cable from the set-top box to

Note In this setup, the VCR cannot record TV

cause no GUIDE Plus+ (EPG) service information.

programmes.

an AC power cable.

Note See the accompanying user manual for other possible connections (e.g. HDMI, Component Video)

dvdr9000h_eu_eng_19341.indd 1

20052005--1111--1515 11:20:1211:20:12 AMAM