English
Connections (Continued)
Connecting to an Amplifier
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic
Connect the Left and Right AUDIO OUT jacks on the Recorder to the audio left and right in jacks on your amplifier, receiver, or stereo system, using the audio cables (A).
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a
1OUT jacks (COAXIAL X) to the corresponding in
jack on your amplifier. Use an optional digital (coaxial X) audio cable.Connect one of the Recorder’s DIGITAL AUDIO
You will need to activate the | recorder’s digital out- |
2 put. (See “AUDIO” on page 25). |
|
Digital Multi-channel sound
A digital
(MPEG 2 and Dolby Digital). Check the receiver manual and the logos on the front of the receiver.
otes
–If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.
–Six Channel Digital Surround Sound via digital con- nection can only be obtained if your receiver is equipped with a Digital
–To see the audio format of the current DVD in the on- screen display, press AUDIO.
Rear of Recorder
X | A |
OPTICAL | COAXIAL | L | R |
DIGITAL INPUT | DIGITAL INPUT | AUDIO INPUT | |
Amplifier (Receiver)
18