Philips DVDR630VR owner manual VCR Play System, AV2 Connection, Progressive Scan, Factory Setting

Before Operation (Continued)

VCR Play System

English	Your video recorder uses triple colour standards, PAL,
	MESECAM and SECAM-L. During play your video
	recorder should select the colour system automatically,
	however if you experience problems you may need to
	do it manually.
		Auto Programming
		Program Edit
		Clock Set
		TV Aspect
		VCR Play Aspect
		VCR Play System	Auto
		AV2 Connection	PAL
		Progressive Scan	SECAM
		Factory Set	MESECAM

AV2 Connection

You can connect a decoder, satellite receiver or other device to the EURO AV2 socket on the back.

Auto Programming
Program Edit
Clock Set
TV Aspect
VCR Play Aspect
VCR Play System
AV2 Connection	Decoder
Progressive Scan	Satellite Receiver
Factory Set	Other Device

Progressive Scan

Progressive Scan Video provides the highest quality pictures with less flickering.

If you are using the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks, but are connecting the recorder to a standard (analog) television, set Progressive Scan to OFF.

If you are using the component video jacks for connec- tion to a TV or monitor that is compatible with a pro- gressive scan signal, set Progressive Scan to ON.

Auto Programming
Program Edit
Clock Set
TV Aspect
VCR Play Aspect
VCR Play System
AV2 Connection
Progressive Scan	OFF
Factory Set	ON

ote

Progressive Scan will not be set when the VIDEO OUT- PUT switch is set at RGB position.

Caution

Once the setting for progressive scan output is entered, an image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan to On in error, you must reset the unit.

1)Remove any disc from the unit and close the disc tray.

2)Press STOP and hold it for five seconds before releasing it. The video output will be restored to the standard setting and a picture will once again be visible on a conventional analog TV or monitor.

Factory Setting

If you need to, you can reset the recorder to all its facto- ry settings. Select ‘SET’ icon then press ENTER.

ote

Some options can not be reset. (Auto Programming, Clock Set, Set Password, Movie Rating, Country Code, and Disc Protect)

Auto Programming
Program Edit
Clock Set
TV Aspect
VCR Play Aspect
VCR Play System
AV2 Connection
Progressive Scan
Factory Set	SET

LANGUAGE

Display Language

Select a language for the Setup menu and on-screen display.

Display Menu	Nederlands
Disc Menu	English
Disc Audio
Disc Subtitle	Deutsch
	Italiano

Disc Language

Select a language for the disc’s Menu, Audio, and Subtitle.

-Original: The original language set for the disc is selected.

-Other: To select another language, select Other option then press ENTER. Use the numbered and ENTER buttons to key-in the correspon- ding 4-digit number according to the lan- guage code list on page 56. If you make a mistake before pressing ENTER, press b repeatedly to delete one by one and correct it.

Display Menu	Original
Disc Menu	English
Disc Audio	French
Disc Subtitle	German
	Italian
	Polish
	Spanish
	Chinese
	Other - - - -

24